RunRyder RC
WATCH
 1 page 639 views POST REPLY
08-13-2010 04:24 PM  8 years agoPost 1
Kloss08

rrApprentice

Bradford PA USA

My Posts: All  Forum  Topic

Just got hte futaba 520 and can not get it to intinalize. I go threw the setup and every thing is good then i turn the power off to eccept everything and the gyro will not initialize. Aka no sevro movement at all. I wate like one minit and nothing what could be up with this

PM  EMAIL  GALLERY  Attn:RR  Quote
08-13-2010 05:04 PM  8 years agoPost 2
cdrking

rrElite Veteran

Seattle

My Posts: All  Forum  Topic

Which tail servo? Are you programming it with the stick or the software?

Jeff

To hover is divine, the alternative is rather PLANE.

PM  EMAIL  GALLERY  Attn:RR  Quote
08-13-2010 05:33 PM  8 years agoPost 3
Kloss08

rrApprentice

Bradford PA USA

My Posts: All  Forum  Topic

Futaba s9257 and i am progreming with the stick. I found that if I unplug the servo after initalization and plug it back in it works fine. Both of these pieces of equipment are brand new

PM  EMAIL  GALLERY  Attn:RR  Quote
08-13-2010 06:41 PM  8 years agoPost 4
cdrking

rrElite Veteran

Seattle

My Posts: All  Forum  Topic

Is the gyro set to the correct pulse rate/servo?

Jeff

To hover is divine, the alternative is rather PLANE.

PM  EMAIL  GALLERY  Attn:RR  Quote
08-13-2010 06:42 PM  8 years agoPost 5
cdrking

rrElite Veteran

Seattle

My Posts: All  Forum  Topic

I am not familiar with setting this gyro via the sticks, I program mine with the software.

To hover is divine, the alternative is rather PLANE.

PM  EMAIL  GALLERY  Attn:RR  Quote
08-13-2010 06:50 PM  8 years agoPost 6
Kloss08

rrApprentice

Bradford PA USA

My Posts: All  Forum  Topic

Pulse rate yes I have got single green blink every second.

PM  EMAIL  GALLERY  Attn:RR  Quote
08-13-2010 08:12 PM  8 years agoPost 7
kineticheli

rrApprentice

Turlock, CA

My Posts: All  Forum  Topic

They have to be in heading hold to initalize.

Citizen #130

PM  EMAIL  GALLERY  Attn:RR  Quote
08-13-2010 09:31 PM  8 years agoPost 8
Kloss08

rrApprentice

Bradford PA USA

My Posts: All  Forum  Topic

I have tryed all of this and still nothing

PM  EMAIL  GALLERY  Attn:RR  Quote
08-13-2010 10:48 PM  8 years agoPost 9
kineticheli

rrApprentice

Turlock, CA

My Posts: All  Forum  Topic

Does the servo work when not plugged into the gyro? If so, then double check that the signal and gain leads are plugged in correctly. And whats up with the green light, I only remember red, blue or violet.

Citizen #130

PM  EMAIL  GALLERY  Attn:RR  Quote
08-14-2010 03:11 AM  8 years agoPost 10
JeffKollin

rrKey Veteran

Jenison, MI

My Posts: All  Forum  Topic

+1^

PM  EMAIL  GALLERY  Attn:RR  Quote
08-14-2010 09:53 PM  8 years agoPost 11
Kloss08

rrApprentice

Bradford PA USA

My Posts: All  Forum  Topic

Yes it is a blue light sorry. the servo works and the gyro will arm but the servo will not move unless you unplug it and plug it back in after initilazition. I actuly fley it today like this and It works great I just have to unplug the servo and plug it back in to get it to work.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 639 views POST REPLY
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Friday, August 17 - 10:15 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online