RunRyder RC
WATCH
 1 page 433 views TOPIC CLOSED
08-12-2010 03:01 PM  8 years agoPost 1
flyen_3d

rrNovice

BIRMINGHAM, ALABAMA

My Posts: All  Forum  Topic

I have just installed a new 3G system on my 600 w/ 14mz tx, when I start the 3g in bypass mode the cyclics, mainly the Pitch seems very responsive, when I start the system normally it seems responsive around center stick but towards the ends of the servo travel it seems to move slower until they stop.I have seen gyros do something similar to the tail servo, does the 3g do the same to the cyclic servos?

I just set up the system on my 700 and don't recall it acting like this.

Also, for example, with the flybar system my pitch curve was around -100/+100 giving me approximately 11/11 pitch. with the 3g the curve moved down to around 65/65 (maybe even 50/50) and gives me around +/-12 deg pitch. Will the servos move less and give more throw with the 3g system?

I have not flown the heli yet

PM  EMAIL  GALLERY  Attn:RR
08-13-2010 12:06 AM  8 years agoPost 2
LeszekJ

rrNovice

Poland

My Posts: All  Forum  Topic

with the 3g the curve moved down to around 65/65 (maybe even 50/50)
If it equals to 38-43% pitch AFR in 12Z then it's perfectly normal.

PM  EMAIL  Attn:RR
WATCH
 1 page 433 views TOPIC CLOSED
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Friday, August 17 - 7:56 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online