Tallahassee, Florida US
My Posts: All Forum Topic
I have a Logo 400 with a flybar and the blade grips have 3mm holes in them. The instructions call for a 4mm bolt but they were not included in the kit. It seems the flybarless grips have a 4mm hole in them but the stock flybarred grips are 3mm. Is that correct? I have one 3mm blade bolt that is shouldered and one that is not. Do the threaded bolts bend under flight loads and are the shouldered bolts necessary? I have 9650s on order, 6008HS rx on order, Ice 100 on order, Castle 1760kV motor, either a GY520 or CY Mini-G, Radix 430s, Radix 72mm, but paddles I am unsure of. I have the stock ones but may end up with 3mm Stubz. Opinions?
On a dog sled team, if you're not the lead dog, the view never changes.