RunRyder RC
WATCH
 1 page 763 views POST REPLY
HomeRC & PowerAircraftHelicopterRadio - Futaba FASST › 14mz and r6008hs - what channels?
05-02-2010 09:25 PM  8 years agoPost 1
Knud Pedersen

rrKey Veteran

Denmark - Europe

My Posts: All  Forum  Topic

Hi

Im bulding a new heli, where im going to use the 14mz FASSST together with the r6008HS rx.
Can i plug in the serovs (digital) in the same channels-order as on the my 6014 FASST?

ChopperKnud
Team Miniature Aircraft
ThePitchbrothers

PM  EMAIL  GALLERY  Attn:RR  Quote
05-02-2010 10:04 PM  8 years agoPost 2
rexxigpilot

rrProfessor

Florida

My Posts: All  Forum  Topic

Should be the same. The channel assignments are in the TX, not the RX. The 6008HS will need digital servos in CH 1-6 unless you disable the HS mode.

I swapped out 6014FS RX's with 6008HS RX's in 2 of my helis. No changes were needed.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-03-2010 06:22 PM  8 years agoPost 3
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

Correct as stated. Make sure you pay attention to get the receiver into HS mode if your servos are digital.

Ben Minor

Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA

PM  EMAIL  GALLERY  Attn:RR  Quote
05-03-2010 08:33 PM  8 years agoPost 4
Corona007

rrApprentice

Chino,Ca

My Posts: All  Forum  Topic

How do you know if it's in HS mode....I just see the link/mode button on mine but there is no switch. Either that or I'm blind.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-03-2010 08:37 PM  8 years agoPost 5
Steff Giguere

rrProfessor

St-Eustache, Quebec, Canada

My Posts: All  Forum  Topic

You must be bind because their is a small hole beside where the light is and you insert a small screw driver to make sure your in HS mode.

Team Synergy, Rail blades, Team Scorpion, V-Team

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-03-2010 09:18 PM  8 years agoPost 6
DougV

rrVeteran

Miramar, Florida - USA (Ft. Lauderdale)

My Posts: All  Forum  Topic

How do you know if it's in HS mode....I just see the link/mode button on mine but there is no switch. Either that or I'm blind.
Here you go: http://manuals.hobbico.com/fut/r600...14hs-manual.pdf

"When turn on the receiver, the LED will be;
• Red when on "Normal mode"
• Green and Red (makes Orange) when on "High
Speed mode". (After two(2) seconds, change to Red.)"

Doug.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-04-2010 05:28 AM  8 years agoPost 7
Corona007

rrApprentice

Chino,Ca

My Posts: All  Forum  Topic

I have had this receiver for over 6 months and never realized it had this function. All I know is that it's been working great as it seemed pretty fast and it was on normal mode. Can't wait to try it with the HS enabled. I love when you have something and don't pay attention to what it can actually do.....LMAO!

Thank you Doug!

Lou.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-04-2010 11:32 AM  8 years agoPost 8
Knud Pedersen

rrKey Veteran

Denmark - Europe

My Posts: All  Forum  Topic

Thx guys. I got. Installed the servoes as in my 6014 rx.
All servoes are digital.

ChopperKnud
Team Miniature Aircraft
ThePitchbrothers

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 763 views POST REPLY
HomeRC & PowerAircraftHelicopterRadio - Futaba FASST › 14mz and r6008hs - what channels?
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, October 16 - 9:44 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online