RunRyder RC
WATCH
 1 page 562 views POST REPLY
HomeAircraftHelicopterFuel-Helicopters New or Limited ActivityElyQ › Metal tail blade grips.
05-01-2010 10:38 PM  8 years agoPost 1
Giantxtc11

rrNovice

Lakeland, Florida US

My Posts: All  Forum  Topic

How do the metal tail blade grips mount to the hub? I fitted them to the hub with the angular bearings and they are slap loose. They will slide down to the base of the hub. Something dosn't seem right. Let me know if you have any ideas.

It's all Good

PM  EMAIL  GALLERY  Attn:RR  Quote
05-01-2010 11:18 PM  8 years agoPost 2
az_heliguy

rrKey Veteran

San Tan Valley, AZ

My Posts: All  Forum  Topic

this is okay on the metal tail blade grips. make sure you have the radial bearings towards the hub though and not the angular bearings. the insert that comes with the angular bearings is WRONG!!!

when all assembled, the blade grip will want to move close to the center of the hub, but once you put the arms from the pitch slider on the blade grips, they wont do that anymore.

when they are spinning, the force is keeping them out and away from the hub and they work like a charm. i have them on both of my comp 50's and no problems.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-02-2010 03:32 AM  8 years agoPost 3
Giantxtc11

rrNovice

Lakeland, Florida US

My Posts: All  Forum  Topic

I figured that. But it's kind of a wierd design. Thanks

It's all Good

PM  EMAIL  GALLERY  Attn:RR  Quote
05-02-2010 03:53 AM  8 years agoPost 4
az_heliguy

rrKey Veteran

San Tan Valley, AZ

My Posts: All  Forum  Topic

it is a little weird, but it works and thats probably the most important.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 562 views POST REPLY
HomeAircraftHelicopterFuel-Helicopters New or Limited ActivityElyQ › Metal tail blade grips.
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Tuesday, August 21 - 10:58 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online