RunRyder RC
WATCH
 1 page 644 views POST REPLY
HomeAircraftHelicopterAlignT-REX 600N › One way bearing shaft issue?
04-30-2010 06:07 AM  8 years agoPost 1
wreckless

rrApprentice

Colombia S.A.

My Posts: All  Forum  Topic

Hello:
main gear stucks with auto rotation gear(dangerous for an engine stop)
I thought it was the one way but it wasn´t(I compare with a new one)
I figure out was the OWB shaft I disassemble and assemble again and went well for two flights and stuck again can any body knows what´s
happening
Thanks
wreckless

PM  EMAIL  Attn:RR  Quote
04-30-2010 03:39 PM  8 years agoPost 2
drb99

rrNovice

Lubbock, TX - USA

My Posts: All  Forum  Topic

I had the same symptoms 8 months ago on mine. Changed out the bearing and sleeve and haven't had a problem since. Some of them are just a fraction off and they bind. You can try cleaning and using light oil instead of grease - but IMHO it will just keep doing the same thing.

I need more lift!

PM  EMAIL  GALLERY  Attn:RR  Quote
04-30-2010 08:39 PM  8 years agoPost 3
Gernejr

rrKey Veteran

Miami, Fl

My Posts: All  Forum  Topic

DRB99 Is there a couple 100 flight on it? If so replace the sleeve they go out of round. Are you using oil or grease on the beaing? I like the clear align grease on the main shsft oneway but using lite oil on the starter oneway. Dont use Tri-flow oil it's to slick and will slip on you... If you have wood drowel that will fit tight in the sleeve and install that into a drill you can polish the sleeve with 1000 grit and oil. I do that all mine and everyone can't undrstand howmy main gear spin so lonnnng..

Sponsored by Visa

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 644 views POST REPLY
HomeAircraftHelicopterAlignT-REX 600N › One way bearing shaft issue?
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Wednesday, August 22 - 2:46 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online