RunRyder RC
WATCH
 1 page 595 views POST REPLY
HomeRC & PowerAircraftHelicopterRadio - Spektrum DSM › Traing Mode Functions
04-30-2010 01:24 AM  8 years agoPost 1
GWS

rrApprentice

Hermosa Beach,CA

My Posts: All  Forum  Topic

I am trying to set up two DX7's for training and want to have the slave unit control the dual rates, all the switches, same as the Master in order to let the student become familiar with the switch functions and locations. I set the Master in P-Link and the Slave in Slave/P-Link and control is not there. I have programed both transmitters exactly the same. I have tried numerous combinations but no luck. Any ideas?

PM  EMAIL  GALLERY  Attn:RR  Quote
04-30-2010 04:44 PM  8 years agoPost 2
rctrooper1

rrApprentice

Brownsville, Texas

My Posts: All  Forum  Topic

I was having the same problem with hooking up two 9303's for training. some channels were there and some were not. Finally I got it to work by doing this. Set your master radio the way you wanted. Use the copy feature and transfer the setup from the master to the slave radio. (on the 9303's this is done having both radios off and hooking up the trainer cord somehow when the cord is hooked up both radios have power and the menus come up) Once you tranfer the settings from the master radio to the slave radio, just make sure both radios are on the same model before you hook up the trainer cord and it should work! Good luck....! pm me if you have any ?s.

Only the master radio is turned on and the slave radio switch remains off.

Make sure you copy the setup from one radio to another. Just by setting up the channels on both radios alike it will not work....

PM  EMAIL  GALLERY  Attn:RR  Quote
05-16-2010 12:47 AM  8 years agoPost 3
GWS

rrApprentice

Hermosa Beach,CA

My Posts: All  Forum  Topic

I cannot figure out how to program the Spectrum radios for training. There are three conditions. Does each radio have to be in the same or different function, Normal, P-link or slave/P-link. I have tried every combination and when I push the training switch on the master, control from the slave is all wrong. I have compared every function and they look to be exactly the same. I have looked on through the search engine and cannot find a procedure to set this up. Also, I don't see a way to copy a model from one radio to another with Spectrum. Help!!!

PM  EMAIL  GALLERY  Attn:RR  Quote
05-16-2010 01:23 AM  8 years agoPost 4
GWS

rrApprentice

Hermosa Beach,CA

My Posts: All  Forum  Topic

I went back and did another search and found the procedure. I tried it and it worked. Love this website.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-16-2010 05:27 AM  8 years agoPost 5
thtoyman

rrKey Veteran

Gone ,Flying.

My Posts: All  Forum  Topic

should link the info here. It would help others out and me to.lol

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 595 views POST REPLY
HomeRC & PowerAircraftHelicopterRadio - Spektrum DSM › Traing Mode Functions
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, December 13 - 8:45 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online