RunRyder RC
WATCH
 1 page 909 views POST REPLY
HomeAircraftHelicopterRadio - Futaba FASST › Idle up question for the 7C
04-28-2010 04:38 PM  8 years agoPost 1
leejax01

rrVeteran

Jax. Fl.

My Posts: All  Forum  Topic

I rescently bought a 2.4 Futaba 7C and found how to get idle 1 and 2 off INH, but can't figure out how to get it to work with the switch flipped. If I change the throttle curve in I1, it switches them in normal and I2 also. I am using it in a Trex 450.

Is there a way to individually set throttle/pitch curves in different flight modes? Thanks.

Perfect practice makes perfect

PM  EMAIL  GALLERY  Attn:RR  Quote
04-28-2010 07:01 PM  8 years agoPost 2
ScottV

rrApprentice

El Dorado Hills, CA

My Posts: All  Forum  Topic

When setting the curves you must have the switch set to the idle you are adjusting. So set the switch to idle 1 then set the menu to idle 1 and you can then make the adjustments.

So long and thanks for all the fish!
`·.¸¸.·´¯`·.. ><((((º>`·.¸¸.·´¯`·.¸><((((º>

PM  EMAIL  GALLERY  Attn:RR  Quote
05-04-2010 06:40 PM  8 years agoPost 3
gogster2k

rrNovice

Montebello, CA. USA

My Posts: All  Forum  Topic

If I recall on the 7C you have to press the MENU button a second time to get the advanced menu and there is another set of throttle and pitch curve menus. Those allow you to select which mode (normal, idle1 idle2) and then you can modify each curve from there.
Hope this helps.

P.S. You can also set your gyro gains from there too.
regards,
Gogian

I can Fly!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-04-2010 06:43 PM  8 years agoPost 4
Steff Giguere

rrProfessor

St-Eustache, Quebec, Canada

My Posts: All  Forum  Topic

gogster2K you recall well. That is exactly it press the menu a second time and set the idle ups from the throttle curve menu.

Team Synergy, Rail blades, Team Scorpion, V-Team

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-04-2010 08:45 PM  8 years agoPost 5
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

You also have to enable (Un INHibit) the throttle curve for I1 and I2 before you can set the pitch curves.

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
05-04-2010 08:58 PM  8 years agoPost 6
leejax01

rrVeteran

Jax. Fl.

My Posts: All  Forum  Topic

I tried that, but in I1 by making it a flat 90 across for my electric heli and it made my normal the same thing. I did it in the advanced settings and the I1 and I2 were not INH.

Perfect practice makes perfect

PM  EMAIL  GALLERY  Attn:RR  Quote
05-04-2010 11:24 PM  8 years agoPost 7
Qinetiqemc

rrApprentice

Somerset - UK

My Posts: All  Forum  Topic

Whilst in the second menu scroll up to TH-CRV N (N) and change the first N to 1 or 2. You can then set your curve up.

Ian

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2010 12:19 AM  8 years agoPost 8
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

Bring it out, it will take me about 2 seconds to figure it out.

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
05-08-2010 10:15 PM  8 years agoPost 9
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

Problem solved

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
05-15-2010 09:17 PM  8 years agoPost 10
leejax01

rrVeteran

Jax. Fl.

My Posts: All  Forum  Topic

Thanks BH for the help. Took a few minutes with the rrMaster.

Perfect practice makes perfect

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 909 views POST REPLY
HomeAircraftHelicopterRadio - Futaba FASST › Idle up question for the 7C
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, August 21 - 5:10 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online