RunRyder RC
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 2791 views POST REPLY
HomeAircraftHelicopter
e-
Align
Other › New Align T-rex 700E with pictures :)
04-27-2010 03:48 PM  8 years agoPost 1
rcman

rrKey Veteran

Logan, Utah

My Posts: All  Forum  Topic

I received mine yesturday.

Here is some progress of it

David Olsen

Pretty much how all Align is packaged now

A lot of people have asked about the white think on the side of the frames, it is where your battery tray slides in, it is molded into the frames

Comes with two battery trays, very nice

Bearing blocks are different then Nitro version

Gives you an idea of the layout

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2010 03:51 PM  8 years agoPost 2
GyroFreak

rrProfessor

Orlando Florida ...28N 81W

My Posts: All  Forum  Topic

That motor looks really small. Whats the specs on the motor.
Paul

I think about the hereafter. I go somewhere to get something, then wonder what I'm here after ?

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2010 03:54 PM  8 years agoPost 3
Wingman77

rrProfessor

Pulaski Tennessee

My Posts: All  Forum  Topic

so you don't have to mess with velcro every charge then? the battery and tray just slides out....that is really nice.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-27-2010 03:54 PM  8 years agoPost 4
blbills

rrKey Veteran

Provo, UT

My Posts: All  Forum  Topic

Looks awesome Dave, keep us updated!

Brian

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-27-2010 04:02 PM  8 years agoPost 5
rcman

rrKey Veteran

Logan, Utah

My Posts: All  Forum  Topic

That motor looks really small. Whats the specs on the motor.
Paul
Motor specs are

David Olsen

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2010 04:05 PM  8 years agoPost 6
rcman

rrKey Veteran

Logan, Utah

My Posts: All  Forum  Topic

so you don't have to mess with velcro every charge then? the battery and tray just slides out....that is really nice.
No the packs can be strapped to the tray then you don't even need to take the canopy off just slide the tray in from the back and your are good to go

David Olsen

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2010 04:06 PM  8 years agoPost 7
rcman

rrKey Veteran

Logan, Utah

My Posts: All  Forum  Topic

Looks awesome Dave, keep us updated!
Thanks Brian

David Olsen

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2010 04:24 PM  8 years agoPost 8
BrainDrain_dx

rrKey Veteran

Wichita KS

My Posts: All  Forum  Topic

Once you put the motor in your hand you won't think its small at all. It makes the heli hard to work on when you are building it because it makes the whole thing top heavy.

KDS Agile 7.2/5.5 Chase 360 - SkyHero Spyder/Spy/Little Spyder
Sponsored by my Visa

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-27-2010 04:25 PM  8 years agoPost 9
GyroFreak

rrProfessor

Orlando Florida ...28N 81W

My Posts: All  Forum  Topic

Thanks for the motor info. It just looked small in the side frame.
Keep us up to date on the build and the first flights.
Paul

I think about the hereafter. I go somewhere to get something, then wonder what I'm here after ?

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2010 04:32 PM  8 years agoPost 10
rcman

rrKey Veteran

Logan, Utah

My Posts: All  Forum  Topic

The head and tail are pretty much built, they are the same as the new LE with the 3G so most everyone know how they go togather. I should have the electrics mounted in the frame tonight, it will pretty close to be completed soon

David Olsen

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2010 04:41 PM  8 years agoPost 11
504Rone

rrKey Veteran

New Orleans, LA.

My Posts: All  Forum  Topic

The head and tail are pretty much built, they are the same as the new LE with the 3G so most everyone know how they go togather.

I thought the mainshaft was shorter on the 700e?

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2010 04:46 PM  8 years agoPost 12
rcman

rrKey Veteran

Logan, Utah

My Posts: All  Forum  Topic

Well yes the main shaft is shorter I will take a picture latter tonight to show the difference on main shaft

David Olsen

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2010 04:54 PM  8 years agoPost 13
mlucia

rrKey Veteran

Essex Jct., Vermont

My Posts: All  Forum  Topic

Dave...

There is no adjustment available on the motor or gear mesh?

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2010 05:28 PM  8 years agoPost 14
steph280

rrElite Veteran

Irvine, California

My Posts: All  Forum  Topic

I was under the impression they will be including these plugs in the kit, but I didn't see it. I guess that'll be an option in the future...

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2010 05:41 PM  8 years agoPost 15
rcman

rrKey Veteran

Logan, Utah

My Posts: All  Forum  Topic

mlucia,
Dave...

There is no adjustment available on the motor or gear mesh?

-Mark
Mark, that is correct no adjustment for gear mesh.

David Olsen

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2010 05:42 PM  8 years agoPost 16
rcman

rrKey Veteran

Logan, Utah

My Posts: All  Forum  Topic

steph280,

I was under the impression they will be including these plugs in the kit, but I didn't see it. I guess that'll be an option in the future...

Hey Steph,
yah it would have been a nice item to have, but mine didn't have one in the kit.

David Olsen

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2010 06:45 PM  8 years agoPost 17
DEFILER

rrApprentice

Houston - USA, Balad - IRAQ, Kuwait - KWI

My Posts: All  Forum  Topic

I was under the impression they will be including these plugs in the kit, but I didn't see it. I guess that'll be an option in the future...
Darn, I was looking forward to using those connectors. Who makes them? Where can I get them?

I only crash due to random planetary intervention

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2010 10:49 PM  8 years agoPost 18
steph280

rrElite Veteran

Irvine, California

My Posts: All  Forum  Topic

Align is going to sell them later. But don't call them De@ns, or the lawyers will be all over it.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-28-2010 02:05 AM  8 years agoPost 19
darkfa8

rrElite Veteran

Brick, NJ - USA

My Posts: All  Forum  Topic

David,

Any concerns of heat soak on the elevator servo from the motor?

Also, aside from what you pointed out already, what other differences have you spotted that deviate from the frame design of the Nitro version?

Is the front radio pod interchangeable at least?

Any difference in the landing gear? Align claims it's lighter.

- Dan Goldstein
Team Revolectrix

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-28-2010 11:55 AM  8 years agoPost 20
Darren Lee

rrElite Veteran

Woodstock, GA

My Posts: All  Forum  Topic

http://www.align.com.tw/shop/produc...roducts_id=3279

Team Synergy / Rail Blades / Morgan Fuel

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 2791 views POST REPLY
HomeAircraftHelicopter
e-
Align
Other › New Align T-rex 700E with pictures :)
 Print TOPIC  Make Suggestion 

 10  Topic Subscribe

Friday, October 19 - 9:47 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online