RunRyder RC
WATCH
 1 page 1161 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsOther › Which rotor head for 10 mm shaft
04-10-2010 04:44 PM  8 years agoPost 1
vertol

rrApprentice

Bayshore N.Y.

My Posts: All  Forum  Topic

Hi guys,
looking to use the 3g system w/my 90 nitro that uses a 10 mm
main shaft.

which flybarless head would you all suggest?
thanks
vertol

PM  EMAIL  GALLERY  Attn:RR  Quote
04-10-2010 04:52 PM  8 years agoPost 2
bobmoser

rrApprentice

Edmond, OK

My Posts: All  Forum  Topic

RJX head
I like the RJX head. Just watch out for the sharp corners. The thing will cut the crap out of you...

14mm grips and 10mm shaft.

http://www.helidirect.com/flybarles...lis-p-13158.hdx

Bob

PM  EMAIL  GALLERY  Attn:RR  Quote
04-16-2010 09:51 PM  8 years agoPost 3
yannick

rrVeteran

South Korea

My Posts: All  Forum  Topic

KASAMA 10mm Cyberhead
this one will also work well, very good quality piece.
https://rc.runryder.com/t582482p1/

PM  EMAIL  Attn:RR  Quote
04-16-2010 09:59 PM  8 years agoPost 4
Jag72

rrProfessor

South of Boston

My Posts: All  Forum  Topic

RJX for the price..
I use the RJX 90 on a few machines and they work great...especially for the price and cost of replacement parts..

spindles are Super cheap when you mash them in the dirt...

PM  EMAIL  GALLERY  Attn:RR  Quote
04-16-2010 10:18 PM  8 years agoPost 5
Ben-T-Spindle

rrProfessor

Central Illinois

My Posts: All  Forum  Topic

KASAMA 10mm Cyberhead

this one will also work well, very good quality piece.
https://rc.runryder.com/t582482p1/
I have always like Kasama heads. Due they make one that will fit my T700?

... BTS

PM  EMAIL  GALLERY  Attn:RR  Quote
04-17-2010 07:59 AM  8 years agoPost 6
yannick

rrVeteran

South Korea

My Posts: All  Forum  Topic

Kasama head
yes this head exists in 10mm or 12 mm shaft.

PM  EMAIL  Attn:RR  Quote
04-17-2010 08:36 AM  8 years agoPost 7
helinutz

rrVeteran

Bournemouth, Dorset, UK

My Posts: All  Forum  Topic

+1 on the RJX.
Got one on my stretched logo 600 and its a beautiful piece of engineering for the money.
Have seen the Kasama (Fueled by hate) head and it is also very nice, but really cant see where it warrants triple the price of the RJX unit

>>>>>I'm so broke, I cant even pay attention!<<<<<

PM  EMAIL  GALLERY  Attn:RR  Quote
04-19-2010 01:56 PM  8 years agoPost 8
BobOD

rrElite Veteran

New York- USA

My Posts: All  Forum  Topic

Have seen the Kasama (Fueled by hate) head and it is also very nice, but really cant see where it warrants triple the price of the RJX unit
I haven't seen the Kasama (Fueled by hate)one but I have seen the RJX stuff.
Beleive me, true precision (if it is that) can easilly warrant a tripple price tag...cost to manufacture at least.
As far as if it warrants that kind of precision for flight performance, well, you just have to fly one to know the difference.
Like I said, I haven't seen the Kasama head but I've flown some very precise mechanics and you get what you pay for....well, you should anyway.

Team POP Secret

PM  EMAIL  GALLERY  Attn:RR  Quote
04-19-2010 04:17 PM  8 years agoPost 9
Justin Stuart (RIP)

rrMaster

Plano, Texas

My Posts: All  Forum  Topic

I'm liking the RJX stuff as well.

Avant RC
Scorpion Power Systems
Thunder Power RC
Kontronik Drives

PM  EMAIL  GALLERY  Attn:RR  Quote
04-19-2010 04:20 PM  8 years agoPost 10
Eco8gator

rrElite Veteran

Palm Beach, FL

My Posts: All  Forum  Topic

Id try to put a Logo 600 head on the thing

C

Xera Motors
ProBar
Minicopter
Thunder Power

PM  EMAIL  GALLERY  Attn:RR  Quote
04-19-2010 08:46 PM  8 years agoPost 11
jsenicka

rrProfessor

Eagle River, WI

My Posts: All  Forum  Topic

Kasama = Kasama or Srimok.

Fueled By Hate is a Tyler Bonta design and has nothing to do with Kasama.

Jim Senicka
Team Manager, GrandRC Flight Team

PM  EMAIL  GALLERY  Attn:RR  Quote
04-19-2010 09:36 PM  8 years agoPost 12
BobOD

rrElite Veteran

New York- USA

My Posts: All  Forum  Topic

Fueled By Hate is a Tyler Bonta design and has nothing to do with Kasama.
Thank you, I kind of thought so.

Team POP Secret

PM  EMAIL  GALLERY  Attn:RR  Quote
04-19-2010 10:25 PM  8 years agoPost 13
helinutz

rrVeteran

Bournemouth, Dorset, UK

My Posts: All  Forum  Topic

Correct, sorry for the wrong info.
Got confused (easily done these days )

>>>>>I'm so broke, I cant even pay attention!<<<<<

PM  EMAIL  GALLERY  Attn:RR  Quote
04-21-2010 07:21 PM  8 years agoPost 14
vertol

rrApprentice

Bayshore N.Y.

My Posts: All  Forum  Topic

rjx head
ok guys, went w the rjx head...wow very detailed instructiuons
what delta set up do u use,Zero?
the zero delta position shown on the exploded view pdf uses the farthest set of holes from the main mast...thing is that the bearings are right behind these holes and the 3mm cap screws hit them...

is this the right set of holse,maybe they sent me bolts a little too long?

thanks for your tips guys.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-21-2010 07:38 PM  8 years agoPost 15
bobmoser

rrApprentice

Edmond, OK

My Posts: All  Forum  Topic

Zero delta
I use the zero delta holes and the shorter fasteners over the bearings that came with the kit.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-22-2010 10:40 PM  8 years agoPost 16
helinutz

rrVeteran

Bournemouth, Dorset, UK

My Posts: All  Forum  Topic

Yes, cap screws are slightly too long.
Either dremel off a bit, or replace with slightly shorter ones

>>>>>I'm so broke, I cant even pay attention!<<<<<

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1161 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsOther › Which rotor head for 10 mm shaft
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Saturday, August 18 - 7:35 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online