My Posts: All Forum Topic
Lipo for RDS8000little,
Yep..... Check out [url=http://commonsenserc].
They make lipos for transmitters and one that will fit and work in the RDS8000. I've used them for many years now with great success.
And yes the RDS8000 will work great with this 11 volt battery. As stated you will have to remove the battery for charging with a lipo charger. The battery will charge up to 12.6 volts. If I recall you will have to swap the pins on the "plug" to put the red (+) wire on the outside edge and the black (-) in the middle. You will not need to add diodes. I use this battery in ALL my "Airtronics-Sanwa" radios.
FM and 2.4.
I hope this is of some small help.
Here when wanted.
There when needed.
Everywhere when looked for.