Andujar - Jaen - Spain
My Posts: All Forum Topic
How do you adjust pitch in the 4g6 heli?
Im noob so after flying it for 2 months or so cause it came adjusted from the e-shop (cause nobody sells it in my country yet), now I´ve had to replace the head and main shaft (after more than 50 crashes and 20 pairs of blades besides some tails and servos).
Since I changed head (I run actually a 37114 inrunner motor) it doesnt stand more than 30-50 seconds in air. I know if not a battery problem cause have more than 20 of them (first thing suggested). Also checked gears and tail and everything else and all run really smooth (second/third thing suggested ). After putting a video I was told pitch was too high, so I need to adjust pitch on blades.
The problem is I dont have a 2801pro tx, I´ve the 2602 wich was the first tx with the 4g6 (december-2009) so I need to adjust pitch manually. So my questions are:
Linkages from servos are used to balance swash plate and also to set pitch in blades depending of their lenght, is that right, and what is the best way to do it?
Links from swash to blades (the big black ones) are used to adjust tracking between baldes, is that right too?
And the other linkages, the short ones which go from swashplate to flybar...what are they used for? I mean which is their mission in the blades pitch/movement?
I love this heli, Has been the first i have had (actually have some 3 ch ones, 2 nine eagles solo pro to make fingers, one esky for outdoor) and it is also my favourite, but havent been able to fly it in one month cause I am not able to adjust pitch in blades properly.
So please guys, Can you give me a hand to fly it again?
Thxs in advance,