RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 506 views POST REPLY
HomeAircraftHelicopterGasser Model RC HelicoptersOther › Radikal servo mounting
04-06-2010 04:19 AM  8 years agoPost 1
seflyer

rrApprentice

Northern California, Palo Cedro

My Posts: All  Forum  Topic

is anyone mounting the servos as shown in the manual? the supplied screws are to short to reach the mounts behind the frames. the manual shows the servos without grommets and I know thats not right, especially on a gasser.

Kevin

My heli is right side up -- the world is upside down

PM  EMAIL  GALLERY  Attn:RR  Quote
04-06-2010 05:40 AM  8 years agoPost 2
Billme

rrElite Veteran

MS

My Posts: All  Forum  Topic

Just do away with the g 10 cover, and mount them with the grommets..The screws are usable this way..

PM  EMAIL  GALLERY  Attn:RR  Quote
04-06-2010 05:52 AM  8 years agoPost 3
James Kovach

rrKey Veteran

canton, oh - US

My Posts: All  Forum  Topic

I do not use the Brass grommets on my helicopters. I do use the rubber insulators. Doing it this way, the stock screws do work.

*disclaimer: These are my opinions. Agree or disagree, Your Call :)
Let'r Rip Tator Chip

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-06-2010 06:15 AM  8 years agoPost 4
seflyer

rrApprentice

Northern California, Palo Cedro

My Posts: All  Forum  Topic

I ended up using the G-10 plates and socket head self tapping servo screws 9/16" in length and it worked out just fine. using 8711's on the cyclic. what angle is the spark plug boot pointed on most of these machines? kinda tight with poor access.

Kevin

My heli is right side up -- the world is upside down

PM  EMAIL  GALLERY  Attn:RR  Quote
04-10-2010 09:41 PM  8 years agoPost 5
chopper_crazy

rrElite Veteran

Delphos, Ohio

My Posts: All  Forum  Topic

I used a set of carbon fiber plates and used the rubber grommets with eyelets. Didn't have a problem.

It's a complex, costly, glow powered anti-gravity machine!

PM  EMAIL  GALLERY  Attn:RR  Quote
04-10-2010 10:42 PM  8 years agoPost 6
smallplanes

rrElite Veteran

S.C. ,SSA

My Posts: All  Forum  Topic

When you use the brass they will tighten up good ,the no reason to use the rubber if you don't use the brass.


Spectra G 26cc
Jewel
Bat 27cc
Trex 700<br

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 506 views POST REPLY
HomeAircraftHelicopterGasser Model RC HelicoptersOther › Radikal servo mounting
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, June 20 - 1:10 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online