RunRyder RC
WATCH
 1 page 499 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsV-Bar › TX live calibration !!!
04-05-2010 08:52 AM  8 years agoPost 1
lloyd

rrKey Veteran

Perth,Australia (South African)

My Posts: All  Forum  Topic

Mooning all you vbar gurus

Im setting up my L700 with the Vbar but I cant get this live section right as its Frustrating the "plumbing" out of me.

When I move say the cyclic stick right the swash goes right but live is left,then I reverse aile, swash now goes left(on right cyclic stick) and live right....

Ive watched the vids and all they say is reverse it inn the tx.

lloyd

PM  EMAIL  GALLERY  Attn:RR  Quote
04-05-2010 09:34 AM  8 years agoPost 2
MrMel

rrProfessor

Gotland

My Posts: All  Forum  Topic

Dont look at the swash, make sure TX calibration is correct.

Make sure you got the Correct swash layout (see picture in Setup-> Swash
) for YOUR helicopter.

If you cannot get aileron movement on the swash later correct, you have switched cable ch2 & 3 servo..
Make sure servos are connected according to picture in the program (swash layout) nothing else.

Do NOT reverse in radio to get correct swash movement!

Watch my VBar 101 videos if you need extra info.

Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more

PM  EMAIL  GALLERY  Attn:RR  Quote
04-05-2010 05:54 PM  8 years agoPost 3
VooDooX

rrElite Veteran

San Francisco Bay Area CA, US (San Mateo)

My Posts: All  Forum  Topic

hey mel currently my vbar is setup so that the swash moves the right direction and also the correction feature moves correctly like tilt heli left swash moves right and vice versa and it flies fine cept maybe some gain issues? but in my calibration menue the live shows left when i move right and right when i move left and is all reversed up but it still flies are you saying i shoudl tear it down and make it correct based on the live menus?

Velocity 50 "99.9999999999999% of an atom is empty space." also 01001000 01001001

PM  EMAIL  GALLERY  Attn:RR  Quote
04-05-2010 05:56 PM  8 years agoPost 4
MrMel

rrProfessor

Gotland

My Posts: All  Forum  Topic

hey mel currently my vbar is setup so that the swash moves the right direction and also the correction feature moves correctly like tilt heli left swash moves right and vice versa and it flies fine cept maybe some gain issues? but in my calibration menue the live shows left when i move right and right when i move left and is all reversed up but it still flies are you saying i shoudl tear it down and make it correct based on the live menus?
Yes! (your not alone, have had 20+ people with the same issue due to poor translation of the program), get it right and it will fly even better.

Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more

PM  EMAIL  GALLERY  Attn:RR  Quote
04-05-2010 06:03 PM  8 years agoPost 5
VooDooX

rrElite Veteran

San Francisco Bay Area CA, US (San Mateo)

My Posts: All  Forum  Topic

ok so you think my wobble problems are based on improper setup that doesn't coincide with what the vbar thinks is actually happening?

Velocity 50 "99.9999999999999% of an atom is empty space." also 01001000 01001001

PM  EMAIL  GALLERY  Attn:RR  Quote
04-05-2010 06:04 PM  8 years agoPost 6
MrMel

rrProfessor

Gotland

My Posts: All  Forum  Topic

Exactly.

Download .20c version, in it there is a picture of the sensor mounting, it should match real life (under Setup Swash)

Then and first then the system truely knows where it "is".

Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more

PM  EMAIL  GALLERY  Attn:RR  Quote
04-05-2010 06:07 PM  8 years agoPost 7
VooDooX

rrElite Veteran

San Francisco Bay Area CA, US (San Mateo)

My Posts: All  Forum  Topic

ya my sensor is mounted the way it shows (i have .20c) but still works even tho live is reversed it still flies but i will tear it down make sure everything is right and then post results here stay tuned (will prolly be a week or so tho lol)

Velocity 50 "99.9999999999999% of an atom is empty space." also 01001000 01001001

PM  EMAIL  GALLERY  Attn:RR  Quote
04-05-2010 06:40 PM  8 years agoPost 8
Flying Tivo

rrKey Veteran

Monterrey,NL,Mexico

My Posts: All  Forum  Topic

Forget about the heli
Just connect the Vbar to the Rx and the USB.
Go to setup and look at the calibration bars for each channel.
After you get those right the others are easy following the
swash drawing on the vbar software.

If life throws at you lemons......Squirt some lemon juice in the eye of your enemy!!!!

PM  EMAIL  GALLERY  Attn:RR  Quote
04-05-2010 07:04 PM  8 years agoPost 9
lloyd

rrKey Veteran

Perth,Australia (South African)

My Posts: All  Forum  Topic

Will give that ago

Thanks Mr Mel

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 499 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsV-Bar › TX live calibration !!!
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, August 19 - 10:40 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online