RunRyder RC
WATCH
 1 page 891 views Post Reply
Home✈️Aircraft🚁HelicopterAlignT-REX 700N › Fuel line hole on the 700
04-03-2010 06:11 PM  10 years ago
Topic Vote0Post 1
knightofcarnage

rrElite Veteran

chicago

MyPosts All Forum Topic
Fuel line hole on the 700
Why did align make 2 different hole size and used the same grommet size? Which holes are you guys using for fuel? Are guys resizing the smaller hole? Drilling a new hole ? It looks like the small hole will pinch the fuel line.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-03-2010 06:21 PM  10 years ago
TDriver

rrVeteran

Portage IN

MyPosts All Forum Topic
Im sure mine was the same size . Anyway i used the one in the center.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-03-2010 06:44 PM  10 years ago
knightofcarnage

rrElite Veteran

chicago

MyPosts All Forum Topic
They are not the same size.
I'm either pinching the fuel line or pressure line.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-03-2010 07:33 PM  10 years ago
jschenck

rrProfessor

La Vista, NE.

MyPosts All Forum Topic
try blowing through the line, you'll find which is clogged. I feed through the center, fuel throgh the side.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-03-2010 10:06 PM  10 years ago
knightofcarnage

rrElite Veteran

chicago

MyPosts All Forum Topic
Hehe nothing is clogged but it does feel like the fuel line is being deformed.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-04-2010 12:48 AM  10 years ago
Duckster

rrApprentice

Brunei

MyPosts All Forum Topic
it was stated in the manual, the hole at the center if u plan not to use a header tank... Coz if u put fuel line out side with stock clunk u will experience fuel lack when ur fuel at the end of Flight... Soo in order to use the outer fuel line grab a header tank, omi fuel magnet or bubbless clunkTrex 600,700 AND 450, GY611, GY401, OS5H, OS91HZ, MGP, HS65HB, Scorpion 2221-8,
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-12-2010 03:11 AM  10 years ago
marc8090

rrElite Veteran

Long Island, N.Y.

MyPosts All Forum Topic
If you want to run your fuel line through the smaller hole simply open it up to the size of the larger hole, install the grommet, and you're good to go.
SHARE  PM  EMAIL  Attn:RR  Quote
04-12-2010 06:04 AM  10 years ago
jongurley

rrApprentice

North Carolina

MyPosts All Forum Topic
I don't run my fuel line through any of them,, I just have them pulled tight and secured,, I don't like how tight they were in the holes,, they were crimping alittle,,HeliWerks Inc. Team Factory Pilot
Team Thomco Hobbies
Thompson Heli Consultants Inc.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-12-2010 11:46 AM  10 years ago
SCC

rrApprentice

Mobile, Al. USA

MyPosts All Forum Topic
drill it out the same size as the bigger hole... Thats what I did and it works great.
SHARE  PM  EMAIL  Attn:RR  Quote
04-12-2010 02:57 PM  10 years ago
knightofcarnage

rrElite Veteran

chicago

MyPosts All Forum Topic
You guys know what drill size to use?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-13-2010 01:39 PM  10 years ago
marc8090

rrElite Veteran

Long Island, N.Y.

MyPosts All Forum Topic
Just use whatever bit fits perfectly in the other hole in the frame that you want to match.
SHARE  PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 891 views Post Reply
Home✈️Aircraft🚁HelicopterAlignT-REX 700N › Fuel line hole on the 700
Print TOPIC

 4  Topic Subscribe

Wednesday, October 28 - 6:07 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online