RunRyder RC
WATCH
 1 page 378 views Post Reply
Home✈️Aircraft🚁HelicopterHelicopter Main Discussion › Routing Fuel Line
04-02-2010 08:25 PM  10 years ago
Topic Vote0Post 1
hahahell

rrNovice

Huntsville,Al- USA

MyPosts All Forum Topic
Routing Fuel Line
I'm not familiar with running tank pressure. Can someone please explain to me how to run the fuel tubing using a kline regulator. Please post pics if you have them. Thanks
SHARE  PM  EMAIL  Attn:RR  Quote
04-02-2010 11:14 PM  10 years ago
gftazz

rrVeteran

upstate N.Y. in the Adirondacks

MyPosts All Forum Topic
Really simple to do.
You don't need or use any muffler pressure so you plug up the small hole in your muffler with a small cap head bolt or the screw that came with it.

Then out of the bottom crankcase cover on your motor if it is cline regulated is a small pressure fitting so you run a piece of fuel tubing out about 100mm to your check valve and make sure it is the right direction when you blow through it so the fuel tank will pressurize.

From the other side of that check valve run another piece of fuel tubing to the overflow opening on the fuel tank, usually on the top of the fuel tank.

Now run fuel tubing from the clunk opening main fuel tank fitting to the cline regulator on the carb and your done.

OR you run tubing from the main fuel tank to your header tank overflow opening, the fuel tubing from the header tank clunk opening fitting to the cline regulator opening on your carb.
Oh No Someone Please Stop Me Before I Go Broke With This Heli Thing!!
SHARE  PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 378 views Post Reply
Home✈️Aircraft🚁HelicopterHelicopter Main Discussion › Routing Fuel Line
Print TOPIC

 0  Topic Subscribe

Friday, October 23 - 12:06 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online