RunRyder RC
WATCH
 1 page 1851 views Post Reply
Home🏬 Classifieds✈️Aircraft🚁Helicopter🏬Classifieds - Fuel Helicopters Sold  Tricked out Hirobo EVO 50, Hyper/MP2 Quick UK !!!RTF!!! With Radio & Spares
03-31-2010 05:05 PM  10 years ago
Topic Vote0Post 1
Salty

rrElite Veteran

St. Augustine

MyPosts All Forum Topic
Tricked out Hirobo EVO 50, Hyper/MP2 Quick UK !!!RTF!!! With Radio & Spares
I’m looking for a HPI Baja SS 5B or 5T ( I prefer the truck) or a rock crawler…or something else on 4 wheels thats large scale

Alrighty, I’ve not flown in some time, nor do I intend to fly anytime soon…I built this heli some time ago and trimmed it up and broke the engine in . It literally has less than an hour of flight time on it., there is one scratch on the blade grip from the starter…heck there isn’t any scratches on the bottom of the skids for heaven’s sake. I flew it inverted once…and it is one locked in bird.

Start with the heli…Hirobo EVO .50, just about everything on it is Quick UK aluminum components in blue.
From the top down,
SAB Blades, MAH tail blades with OS .50 HYPER and Curtis Youngblood MP2

Quick UK Aluminum rotorhead, Flybar arm, Flybar cage, Stainless flybar, SD Aluminum washout assembly with retainer, swashplate.

Down to the frame:
It’s got a sweet mod that I engineered out of X Spec parts. I Realized that the Xspec collective assembly was the same exact assembly that the EVO had other than the length of the actuator arm. I cut it down to the EVO specs and installed the entire aluminum collective assembly including the beefy see saw assembly with arms….Next is the timing gear for the tail drive, upper and lower bearing blocks are Quick UK aluminum. SD auto hub with delrin gears, and aluminum third bearing block on the mainshaft, Boom mounted servo kit…C/F pitch shaft, aluminum horizontal fin mount, carbon fiber boom supports with aluminum ends and boom support strut stabilizer, blue anodized boom, C/F 3D fins, Header tank, aluminum fuel filter with refuel port, Antenna mount assembly, CNC Pipe plug, Blue Tuff Strut style wide/low landing gear, and a custom touch to save the rear frame from breakage in a hard landing (works a treat, haven’t lost a frame since I started installing this frame mod) It’s a CNC alum frame bridge… Freya tail rotor assembly, Alum Blue servo retainers and finally a remote glow.

Electronics:
S9253 on the tail, S9252’s on all other surfaces, GY401 Gyro,
Duralite Plus 2800MaH 7.4 volt battery with Duralite regulator and tail servo voltage stepdown, Futaba Heavy duty ON/OFF switch Futaba R149Dp (HI)

Radio:
Futaba 9CHP with CAMPAC and TP-FSM Adjustable Module (Heli on Channel 45) CNC aluminum Radio Stand with 9z anodized blue gimbal knobs. Charger, Wide neck strap and all flags included as well as aluminum case with form fitting foam.

Other Stuff:
-Duralite charger as well as Duralite digital load tester.
-3 sets of carbon fiber blades (in addition to whats on the bird) 1 set of CY with flash strips, 1 set of SAB and 1 set of Mavrikk
-1 blue aftermarket Quick UK boom,
-2 stock booms
-1 set of NIP Quick UK landing gear (wide/low)
-4 NIP stainless flybars
-1 NIP set of boom supports with alum ends
-2 C/F tail servo push rod
-2 sets of silver alum boom supports 1 with alum ends, 1 with plastic ends
-1 Min Air pitch guage with paddle attachments
-1 OS .50 engine block for parts
-1 standard OS .50 Engine (excellent internals) No carb (bolt in and fly)
-1 Complete frame set with all the crap still bolted to it (lightly used, no flaws)
-1 additional blade holder
-1 set of stock fins
-1 fiberglass canopy with custom paint (never flown) the yellow “tears” in the paint are ghosted into the canopy It’s super cool and I never got the balls to fly it on my other EVO’s
-3 NIP mainshafts
-1 blue C/F vert 3D fin
-1 pair of 3D NIP Quick UK C/F fins
-1 used COMPLETE tail rotor gearbox assembly with belt, bolt on and fly
-3 NIP Clutch liners
-1 New out of package strong box
-1 big ol stack of NIP OS engine parts/hardware
-NIP fuel line clips
-1 NIP set of skid stops
-1 NIP pack of fuel line
-1 Lightly used main gear assembly with auto hub as well as tail drive assembly
-1 NIP set of thrust bearings
-.5 set of NIP tail thrust bearings
-1 used set of stock paddles
-2 NIP packs of deadblow aluminum muffler gaskets
-1 lightly used clutch (not sprung)
-1 lightly used SD aluminum complete washout assembly with arms
-Misc tail rotor parts, boom mounted servo parts, complete stock collective assembly, almost a whole set of linkages with bell cranks, misc hardware, ball links, bushings, bearings etc
-1 NIP flybar (thought I had more, if I find em they go too)
-13 NIP packs of Hirobo parts, including one way bearings, grommets, hardware, linkages, levers, collets, arms etc.
-1 set of swashplate leveler as well as a flybar lock.
-1 set MAH C/F Paddles
-1 set Green TT paddles
-1 set white 3d Min Air paddles
-1 set Orange Min Air Paddles
-1 set CY C/F tail rotor blades
-1 set SAB C/F tail rotor blades
-1 set MAH C/F tail rotor blades
-2 NIP Glow plug extenders (Mavrikk)
-And a whole box of Misc stuff, hardware, linkages, one way bearings, fuel line, blade spacers, NIP packs of hardware, servo horns, parts as well as the box in the photos.

Additionally, If it’s a local pickup I’ve got all the starting equipment, field box, HD Starter with one way wand, power panel, NIP fuel pump, more parts and tools that is in the field box as well as 2 and a half or so cases of Curtis Youngblood 30% nitro fuel (that stuff is too big to ship)

I’m getting out for awhile and don’t know if I intend on returning, take a look in my gallery to see what kind of higher end birds I’ve owned and how anal retentive I am about em… and take a look at my feedback, I’ve been around for a long time and no one has had any problems from me….heck just by reading all this crap on this post you can see I list stuff to the letter. Anything I find that is not listed here goes with the deal, this is a turn key set up with EVERYTHING and it’s friggen NICE. SUPER low time and NO wear, tear or otherwise.

$1800 OBO outright (split shipping 50/50) If I’m starting a bit high…shoot me an offer, as nice as this set up is I believe it’s worth it…

I know some of it electronics wise is dated marginally, I know there is now better stuff out there…BUT I implore you to look at the amount of crap your getting and the prices you’d pay otherwise. For a newbie getting into it, it’s pretty dang reasonable. All servos, electronics and the like have the same amount on them as the airframe (less than an hour) the transmitter has approx 5 hours on it, shows no scratches, marks or otherwise…it looks flippen new.

(field equipment/fuel is essentially free as I cannot ship that stuff cost effectively…unless you want to pick up 100% shipping on it…)

I don’t do Paypal any longer, been out of the game for awhile and lost my login and have no desire to retrieve it.
BUT the real thing I want is a TRADE, partial trade is fine (part your stuff and part your money)

I’m looking for a HPI Baja SS 5B or 5T ( I prefer the truck) or a rock crawler….not into the 1/8 scale/smaller stuff much anymore…I wanna go big and have something that’s a bit more “kid” friendly to do with my son…BUT hit me up with whatcha got, all I can say is maybe or no…I prefer a even trade (IE your stuff is as nice and equals my stuff)

Thanks for putting up with the long write up….I just want everything to be listed with as much detail as I can. (I’d like the same courtesy)

Lotsa pics…enjoy

Ask your Doctor if getting off your ass is right for you.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-02-2010 07:55 AM  10 years ago
Salty

rrElite Veteran

St. Augustine

MyPosts All Forum Topic
Reduced to $1500 for a bump up top....still would rather trade straight up for a 1/5th scale screamer...Ask your Doctor if getting off your ass is right for you.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-04-2010 04:37 AM  10 years ago
Salty

rrElite Veteran

St. Augustine

MyPosts All Forum Topic
price drop $1400 50/50 shipping

Still rather trade
Ask your Doctor if getting off your ass is right for you.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-06-2010 08:10 PM  10 years ago
Salty

rrElite Veteran

St. Augustine

MyPosts All Forum Topic
Still rather trade straight, however still on the marketAsk your Doctor if getting off your ass is right for you.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-13-2010 11:15 PM  10 years ago
Salty

rrElite Veteran

St. Augustine

MyPosts All Forum Topic
trade? Cash?Ask your Doctor if getting off your ass is right for you.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-21-2010 02:11 AM  10 years ago
Salty

rrElite Veteran

St. Augustine

MyPosts All Forum Topic
UpAsk your Doctor if getting off your ass is right for you.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-22-2010 12:20 AM  10 years ago
AWittleWabbit

rrElite Veteran

O.C., CA

MyPosts All Forum Topic
Wow that's a lot stuff. Bump for a clean Hirobo. I gotta stop browsing the classifieds. Damn rotors wont stop spinning Heli-itis sufferer.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-08-2010 03:02 AM  10 years ago
Salty

rrElite Veteran

St. Augustine

MyPosts All Forum Topic
Bump to the Top...

Still lookin....hadda couple of offers for GOBS of smaller scale stuff...which all looked cool however, I gotta get one of them 5T's or 5B's....(or somethin else 1/5th scale or 1/4 scale.)
Ask your Doctor if getting off your ass is right for you.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-11-2010 09:27 PM  10 years ago
Salty

rrElite Veteran

St. Augustine

MyPosts All Forum Topic
This has been on the bottom a long time...Just seeing if there is a renewed interest in this stuff...

Hadda couple of trade offers, one in particular was nice....but not exactly what I was lookin for (which I may revisit inna bit)

Anyway, this heli and gear is still available...wanna trade it or sell it...
Ask your Doctor if getting off your ass is right for you.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-12-2010 12:49 AM  10 years ago
fung_jeff

rrKey Veteran

Vancouver, BC, Canada

MyPosts All Forum Topic
Lol C'mon guys this is a steal... I just got a Trex 500 and a Raptor so can't get this.. Free BUMP.Jeffrey Fung...15 Years old - FLEET: Evo 50, Raptor 30, Trex 500, SDX's, X-Spec, Logo 10/400
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-16-2010 07:05 PM  10 years ago
big scott

rrApprentice

edgewood,md usa

MyPosts All Forum Topic
i have a very nice 5b that i made for onroad . it has a self modded 26 engine that screams.

all you need to run it is a radio and recevier.

heres a pic.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-16-2010 07:34 PM  10 years ago
big scott

rrApprentice

edgewood,md usa

MyPosts All Forum Topic
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-19-2010 02:23 AM  10 years ago
neverhappy

rrApprentice

Piedmont.Al. USA

MyPosts All Forum Topic
big scott
he's a great guy to deal with... pm me and i can tell you more. traded with him on other sites.

jeff
Jeffrey:) (Love and Peace to all)
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-19-2010 02:51 PM  10 years ago
big scott

rrApprentice

edgewood,md usa

MyPosts All Forum Topic
thanks jeff, i think salty has forgoten about his ad.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-26-2010 04:22 AM  10 years ago
Salty

rrElite Veteran

St. Augustine

MyPosts All Forum Topic
Your absolutly correct, in between of trying to work 70ish hours a week, build a truck, and go to the hospital twice a day for two months straight to see my 2 month old premie baby girl I been a bit busy....

My apologies, I been around, but honestly forgot about the heli add....

Anyway, I'll drop you a PM (you can do the same)
Ask your Doctor if getting off your ass is right for you.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-08-2010 01:41 AM  9 years ago
Salty

rrElite Veteran

St. Augustine

MyPosts All Forum Topic
$1200 buyer pays shipping....

Still would rather have a 1/5 scale trade OR a monster truck and a crawler combo....

I prefer the large scale stuff though...
Ask your Doctor if getting off your ass is right for you.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1851 views Post Reply
Home🏬 Classifieds✈️Aircraft🚁Helicopter🏬Classifieds - Fuel Helicopters Sold  Tricked out Hirobo EVO 50, Hyper/MP2 Quick UK !!!RTF!!! With Radio & Spares
Print TOPIC

 2  Topic Subscribe

Classifieds › HELP-FAQ
Attention Buyers! To receive feedback Post Reply in the seller’s topic. The seller can then click your post's Add Classified Feedback link.
Attention Sellers! Stating price is not mandatory but recommended. Post Reply commentary that interferes with the selling process (and not replied to) will be removed upon request. Click Attn:RR on the offending classified post. Repeated NIB-NIP sales are not allowed. Take it to EBay.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Saturday, October 31 - 5:45 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online