RunRyder RC
WATCH
 1 page 478 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Servo - Gyro - Gov - Batt › Mounting receiver and remote receiver
03-30-2010 11:37 PM  10 years ago
Topic Vote0Post 1
Rotors Up

rrApprentice

Reading, Pa

MyPosts All Forum Topic
Mounting receiver and remote receiver
What is the best method to use for mounting the Main and remote receiver? Velcro or double sided tape.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-30-2010 11:52 PM  10 years ago
z11355

rrMaster

New England

MyPosts All Forum Topic
I use 3M dual-lock plastic velcro and then often a strap for the main rx.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-31-2010 01:09 AM  10 years ago
Yug

rrMaster

UK. Herts

MyPosts All Forum Topic
Whatever, but also use a cable tie just to prevent it from going walkabouts.Vegetable rights and Peace
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-31-2010 01:47 AM  10 years ago
ChrisMoore

rrApprentice

Bay Village, OH

MyPosts All Forum Topic

I use double sided foam tape to mount the satellite/remote receiver and 1/2" foam rubber and a velcro strap to secure the main receiver.

you can use a Spektrum flight log to adjust the position of the remote receiver to the ideal spot but I havent done that and I havent had any problems yet.
Chris. AMA 497715 IRCHA 3351
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-31-2010 01:55 AM  10 years ago
sinte

rrVeteran

Tacoma,WA

MyPosts All Forum Topic
Velcro & strap for me as it is easier to remove for maintenance.

Jim
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-31-2010 02:38 AM  10 years ago
Damper

rrVeteran

Point Blank TX USA

MyPosts All Forum Topic
Where do you get the extension for the satelite receiver at, like chrismoore has in his pic?

Thx
Full Throttle Spooning Leads To Forking
SHARE  PM  EMAIL  Attn:RR  Quote
03-31-2010 03:09 AM  10 years ago
ChrisMoore

rrApprentice

Bay Village, OH

MyPosts All Forum Topic
thats just a piece of scrap plastic from an airplane canopy I cut out. You can pickup something thicker (which I probably need to do) from the local hobby shop. Clear butyrate or polycarbonate should do it. I glued one end to the plastic servo frame/radio tray area and then double sided taped the receiver to the other end.Chris. AMA 497715 IRCHA 3351
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 478 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Servo - Gyro - Gov - Batt › Mounting receiver and remote receiver
Print TOPIC

 2  Topic Subscribe

Friday, October 23 - 3:29 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online