RunRyder RC
WATCH
 1 page 528 views Post Reply
HomeRC & Power✈️Aircraft🚁Helicoptere-Electric Motors-Controllers-ESCOther › Align ESC/HDX motor problem
03-30-2010 07:15 AM  10 years ago
Topic Vote0Post 1
Solmanbandit

rrElite Veteran

Tucson , AZ

MyPosts All Forum Topic
Align ESC/HDX motor problem
I seem to be having an intermittent problem with my Align ESC and or HDX motor on my Blade 400. I flew today and first flight was fine. At the end of the second flight, it seemed that I could it stutter a little bit. That may have been a low power issue. Later in the day, I tried plugging it in and couldn't get the ESC to initialize. I tried about 5 x before it worked. I did a few more times and seemed to be fine. I went out to fly and couldn't get it to initialize for nothing and gave up. Now, once again, it is working just fine. I am stumped as to what is going on. Am I getting a bad connection or what?
Trex 700E / Trex 500 ESP - Ikon/ HD 500 - Ikon 2/ Goblin 500 Ikon 2
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-30-2010 08:31 AM  10 years ago
jhhyah

rrApprentice

Taipei, Taiwan

MyPosts All Forum Topic
[quote]Am I getting a bad connection or what?

you might have a soldering problem or contact issue on the three pole connector. It happen to mine once haveing same thing as your case. check the soldering first.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-30-2010 09:01 AM  10 years ago
Spitfire1

rrElite Veteran

Perth Australia

MyPosts All Forum Topic
Im wondering about your deans connectors, are you useing the genuine deans ultra or the immitation brand ones, I had the same thing and it was the fake deans plugs I was useing, always used deans ultra since then with no problems.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-30-2010 02:29 PM  10 years ago
Solmanbandit

rrElite Veteran

Tucson , AZ

MyPosts All Forum Topic
It said Dean's on the package, so I am assuming they are the real deal. As far as the soldering goes, I know he resoldered a couple of them the last time I had problems. If it continues, I may take off all the female connectors and solder new ones on.Trex 700E / Trex 500 ESP - Ikon/ HD 500 - Ikon 2/ Goblin 500 Ikon 2
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 528 views Post Reply
HomeRC & Power✈️Aircraft🚁Helicoptere-Electric Motors-Controllers-ESCOther › Align ESC/HDX motor problem
Print TOPIC

 2  Topic Subscribe

Saturday, October 31 - 4:59 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online