RunRyder RC
WATCH
 1 page 676 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsV-Bar › Logo 500 V-Bar elevator servo binding at max travel
03-30-2010 12:49 AM  10 years ago
Topic Vote0Post 1
LaurenceGough

rrElite Veteran

UK

MyPosts All Forum Topic
Logo 500 V-Bar elevator servo binding at max travel
Hey guys,

Got my Logo 500 set-up spot on mechanically with V-Bar.

I have an issue at full positive pitch and full forwards elevator the rear servo arm catches the top. Everywhere else is fine in the travel.

Do I adjust anything in the software?

At "hover position" the cyclic ring is set so it doesn't bind anywhere, and is the same as the preset Logo 500.

Everything is 90 degrees, the elevator servo arm was a teeny bit high but it was the closest arm and servo position to 90 degrees.

Cheers,

Laurence
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-30-2010 06:08 AM  10 years ago
MrMel

rrProfessor

Gotland

MyPosts All Forum Topic
That is normal, you will NEVER EVER get that much travel in flight.
If you .. about it and want to make sure it wont happen even on the bench, its dremel time on the frame.

But that's not needed for flight.
Gone fishing..or hunting..or something
My site: http://heli.dacsa.net - VBar videos and more
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-30-2010 09:48 AM  10 years ago
LaurenceGough

rrElite Veteran

UK

MyPosts All Forum Topic
Thank you MrMel, that's what I thought (crazy travel haha).

I'll leave as be .

Cheers,

Laurence
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 676 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsV-Bar › Logo 500 V-Bar elevator servo binding at max travel
Print TOPIC

 1  Topic Subscribe

Tuesday, October 20 - 12:56 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online