RunRyder RC
WATCH
 1 page 1198 views Post Reply
Home✈️Aircraft🚁Helicoptere-AlignT-REX 500 › T-REX 500 Tail oscillation
03-29-2010 05:04 PM  10 years ago
Topic Vote0Post 1
Vella

rrNovice

Shrewsbury Shropshire England

MyPosts All Forum Topic
T-REX 500 Tail oscillation
I am very happy with the performance of my T-REX 500 ESP, but one thing puzzles me. I get a small oscillation in pitch ( nodding of the tail ) in the hover. I have tried increasing head speed and the tail bounce is still there. Could it be a head damper issue ? I am running on the softer grey ones supplied in the kit.
TREX 500
SHARE  PM  EMAIL  Attn:RR  Quote
03-29-2010 05:12 PM  10 years ago
mmc205

rrElite Veteran

PA - USA

MyPosts All Forum Topic
depends on what headspeed you running. Run up to about 26-2800 and see if it goes away.
I was able to run hard dampers and 2500 rpm and didn't have any tail bobbing issues.
***Logo 600 vbar***Henseleit TDR vbar***
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-30-2010 03:34 AM  10 years ago
rocco.sj

rrVeteran

California,

MyPosts All Forum Topic
Try one of these sleeve, should take care of it.
http://www.alignrcusa.com/index.php...products_id=769
You might want to try different CF main blades,not the GF.
Good luck.

cheers
Ray F.

FYI tip...the T500 like 2600 to 2900 headspeed.
JR Americas
Evo Power Battery
Radio Frequency RC
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1198 views Post Reply
Home✈️Aircraft🚁Helicoptere-AlignT-REX 500 › T-REX 500 Tail oscillation
Print TOPIC

 2  Topic Subscribe

Saturday, October 24 - 4:39 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online