RunRyder RC
WATCH
 1 page 943 views Post Reply
Home✈️Aircraft🚁Helicoptere-MikadoLogo 600 › electronics for 6s Mikado 600 3d
03-29-2010 09:20 AM  10 years ago
Topic Vote0Post 1
soggy

rrApprentice

thailand

MyPosts All Forum Topic
electronics for 6s Mikado 600 3d
HI guys.
anyone can recommend me what is the good electronics to setup my Logo 600 V Bar 600mm blade?..preferably 6s 5000mah 30C setup as i have all the batteries already frm my trex 600Esp

thanks mate
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2010 01:38 PM  10 years ago
mmc205

rrElite Veteran

PA - USA

MyPosts All Forum Topic
solid:
9254 on tail
9452 on cyclic
scorpion 4025-1100 (not sure on pinion)
cc ice 100
Turnigy 6S 5000ish 30C

even better
9256 or brushless 451 on tail or torq tail
jr 8717 or brushless 251 or torq cyclic
scorpion 4025-100
Jive 80 LV
Thunder power 6S 5000ish 45C
***Logo 600 vbar***Henseleit TDR vbar***
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2010 02:58 PM  10 years ago
soggy

rrApprentice

thailand

MyPosts All Forum Topic
hi MM, what is your setup for your Logo ?

my plan is running on Bl 451 cyclic, BL251/ 9452 , Ice 100A , Scorpion 4025-1100 V Bar 4.0

but some advise not to run on 6s as its stressing alot on the ESC and Batts..what is your take?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2010 03:04 PM  10 years ago
Frank Bostwick

rrElite Veteran

Cincinnati Ohio

MyPosts All Forum Topic
Im reading that most are using a seperate BEC on that set up...RIP ROMAN
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2010 03:18 PM  10 years ago
Wingman77

rrProfessor

Pulaski Tennessee

MyPosts All Forum Topic
I would go with a minimum of 8s.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-29-2010 03:21 PM  10 years ago
soggy

rrApprentice

thailand

MyPosts All Forum Topic
ouch..it will be a pain in the *ss if i run 8s..i have to change a new charge from my under utilized BC6-10. Trying a setup which i dont need to change my charger..

hope to hear from comment ..any real user that tried ICE100A on a logo 600 with 6s?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2010 03:48 PM  10 years ago
mmc205

rrElite Veteran

PA - USA

MyPosts All Forum Topic
I run 12S 3000 to 3300.
Basically that way i can repurpose my 6S logo 400 packs in series for my logo 600 and use my 6S charger to charge one pack at a time, or charge 2 or more 6S packs in parallel. (just make a parallel balance adapter and make sure all packs being charged in parallel are close to the same voltage)
***Logo 600 vbar***Henseleit TDR vbar***
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2010 03:50 PM  10 years ago
Wingman77

rrProfessor

Pulaski Tennessee

MyPosts All Forum Topic
that is a good idea.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-29-2010 03:58 PM  10 years ago
soggy

rrApprentice

thailand

MyPosts All Forum Topic
i am thinking how come a rex600e runs on 600mm blades, with its own ESC align 100A, and is heavier than a logo 600.. but it can run on a 6s

how come logo need to be so special case? even dont accept a Ice 100A( is running at risk )

anyone can enlighten me? i mean both heli is almsot same right?
its 600 size anywaeee
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2010 04:03 PM  10 years ago
Wingman77

rrProfessor

Pulaski Tennessee

MyPosts All Forum Topic
I have the align 600e on 6s and I have never got any kind of good performance out of it. higher voltage is just the way to go if you don't want disappointment.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-29-2010 04:15 PM  10 years ago
soggy

rrApprentice

thailand

MyPosts All Forum Topic
never have good performance = canot do 3D? without about sports flying? or inverted?

sorry i am quite new ...thanks wingman
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2010 04:19 PM  10 years ago
Jag72

rrProfessor

South of Boston

MyPosts All Forum Topic
logo 600 on 6s
There are a few guys that run these setups...they call them the logo 500 SE

It will run fine on an Ice 100 Esc and 6s...the logo 600 on 6s will still run better than any trex 600 on 6s.

the logo is a very light and good flying machine...quite a few people have reported these setups flying 3d Very well...

It's just that MOST people run a logo 600 on 10-12s...but if you search for "500SE" here you'll see that there are people starting to run this config...

Anthony
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2010 04:20 PM  10 years ago
soggy

rrApprentice

thailand

MyPosts All Forum Topic
hi MM, wats the flight time for your Logo 600 with 3000mah 12s?

and if you charge that way, that means it will be 6000mah each cell?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2010 04:23 PM  10 years ago
soggy

rrApprentice

thailand

MyPosts All Forum Topic
hi anthony, thanks for the tips to search on 500SE..will search on those threads..
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2010 04:26 PM  10 years ago
Jag72

rrProfessor

South of Boston

MyPosts All Forum Topic
logo 500Se vid...
Here's one vid for you to look at...

Watch at YouTube

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2010 05:09 PM  10 years ago
mmc205

rrElite Veteran

PA - USA

MyPosts All Forum Topic
I get 5.5 minutes using 80% of 12S 2650 and projected 7.0 minutes using 80% of a 3300.

this is doing smooth 3D, big air, fff, some collective banging, etc.
I'm runnin 2000 on the head right now which i'm pleased with.

Getting peaks of 2800-2900 watts.
***Logo 600 vbar***Henseleit TDR vbar***
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2010 05:10 PM  10 years ago
mmc205

rrElite Veteran

PA - USA

MyPosts All Forum Topic
yes, as far as the charger is concerned, your charging a 6S 6000mah pack, so adjust your charge rate accordingly (12 amps for 2C charge, etc)***Logo 600 vbar***Henseleit TDR vbar***
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2010 06:19 PM  10 years ago
soggy

rrApprentice

thailand

MyPosts All Forum Topic
great info MM..thanks appreciate it
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 943 views Post Reply
Home✈️Aircraft🚁Helicoptere-MikadoLogo 600 › electronics for 6s Mikado 600 3d
Print TOPIC

 3  Topic Subscribe

Monday, October 19 - 9:57 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online