RunRyder RC
WATCH
 1 page 2193 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Logo 600 › Max head speed Logo 600
03-14-2010 01:21 AM  8 years agoPost 1
Jesper

rrApprentice

Sweden

My Posts: All  Forum  Topic

I am using some 660mm blades that weigh just under 200g on my Logo 600 for AP. I am currently spinning them about 1600 rpm but I would like to try the 1700-1800 rpm range. Would this be within structural limits?

Thanks,

Jesper

PM  EMAIL  GALLERY  Attn:RR  Quote
03-14-2010 01:25 AM  8 years agoPost 2
OICU812

rrMaster

Edson, Alberta, Canada

My Posts: All  Forum  Topic

Yea absolutely, the standard 600 Logo can take 2400 rpm so upping will be no issue, even my stretched ones I was running 690s for 3D at 2150 rpm so up away.

...Once upon a time there were Nitros, flybars and frequency pins...

PM  EMAIL  GALLERY  Attn:RR  Quote
03-14-2010 01:57 AM  8 years agoPost 3
Jesper

rrApprentice

Sweden

My Posts: All  Forum  Topic

Thanks! Rather be safe than sorry! By the way, how much does your 690 blades weigh?

/Jesper

PM  EMAIL  GALLERY  Attn:RR  Quote
03-14-2010 03:05 AM  8 years agoPost 4
OICU812

rrMaster

Edson, Alberta, Canada

My Posts: All  Forum  Topic

MM I can't remember, they were Rotortech 690s. I don't have any stretch Logos at present so I can't weigh them sorry.

...Once upon a time there were Nitros, flybars and frequency pins...

PM  EMAIL  GALLERY  Attn:RR  Quote
03-14-2010 03:10 AM  8 years agoPost 5
Jesper

rrApprentice

Sweden

My Posts: All  Forum  Topic

No problem...seems that they are about 170g.

Thanks again!

/Jesper

PM  EMAIL  GALLERY  Attn:RR  Quote
03-14-2010 09:25 PM  8 years agoPost 6
Hati

rrNovice

Perth, Australia

My Posts: All  Forum  Topic

Yea absolutely, the standard 600 Logo can take 2400 rpm so upping will be no issue, even my stretched ones I was running 690s for 3D at 2150 rpm so up away.
Page 2 of the Logo manual. Factory recommended max RPMs are 2100 for the 500 and 2000 for the 600

PM  EMAIL  GALLERY  Attn:RR  Quote
03-14-2010 10:12 PM  8 years agoPost 7
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

I run mine @ 2350

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-15-2010 12:29 AM  8 years agoPost 8
LaurenceGough

rrElite Veteran

UK

My Posts: All  Forum  Topic

Who runs it actually at what the manual says or below? Not many .

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 2193 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Logo 600 › Max head speed Logo 600
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Sunday, December 16 - 5:10 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online