RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 537 views POST REPLY
HomeAircraftHelicopterRadio - JR DMSS › Question JR 9303 2.4 Light
03-13-2010 11:23 AM  8 years agoPost 1
tamro

rrApprentice

Fort Mill South Carolina USA

My Posts: All  Forum  Topic

Is there a way an indication light can be installed on the remote to inidcate the TX is still on?

Thanks

HeliPoPTer

PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2010 11:37 AM  8 years agoPost 2
1275mini

rrKey Veteran

Wirral North West U.K.

My Posts: All  Forum  Topic

why do you need that just move the sticks !

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-13-2010 02:01 PM  8 years agoPost 3
tamro

rrApprentice

Fort Mill South Carolina USA

My Posts: All  Forum  Topic

Stick
lots of times i turn the heli off but then forget to turn my remote off and put it in the case.

HeliPoPTer

PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2010 03:19 PM  8 years agoPost 4
Zaneman007

rrElite Veteran

Texas - USA

My Posts: All  Forum  Topic

I'm sure that you could drop an LCD in there, but on a bright day I doubt that you would notice it, and the installation would be a pain in the butt.

If you are looking at the screen and not noticing that it is on, I'd recommend an after flight check list.

or

If colors do it for you, you can take some neon orange paint, flip the off/on switch to on, and paint the exposed plastic. That way when it is on you'll see the paint and when it is off the paint is covered and you see, nada.

Old Guys Rule!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2010 04:20 PM  8 years agoPost 5
dos boss

rrApprentice

Broken Arrow, Oklahoma - USA

My Posts: All  Forum  Topic

LED
Radio Shack has a 12v LED that works perfect only problem is location. I put one on my DX7 when I put Lipo battery in it so I would not forget to turn it off. I haven't needed to change battery in 9303 yet but it is coming soon.

12V LED



If you have to bend over more than once to pickup your Heli it was a bad landing

PM  EMAIL  GALLERY  Attn:RR  Quote
03-16-2010 01:57 PM  8 years agoPost 6
JRjoe

rrElite Veteran

Jonesville , IN USA #1

My Posts: All  Forum  Topic

You can't just look at the screen? Seems like a no brainer to me, it's either on or not.


JRjoe.....
Indoor plumbing??? No, we don't need that!!!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-16-2010 05:24 PM  8 years agoPost 7
dos boss

rrApprentice

Broken Arrow, Oklahoma - USA

My Posts: All  Forum  Topic

It is a lot easier to spot a bright LED light than the screen and I have seen several times that someone forgot to turn off the transmitter so it would not hurt to add the LED if that is what you prefer. It is really up to the individual I think.



If you have to bend over more than once to pickup your Heli it was a bad landing

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 537 views POST REPLY
HomeAircraftHelicopterRadio - JR DMSS › Question JR 9303 2.4 Light
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, June 24 - 10:26 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online