RunRyder RC
WATCH
 1 page 501 views TOPIC CLOSED
HomeAircraftHelicopterGasser Model RC HelicoptersOther › Help with oil
03-11-2010 08:53 PM  8 years agoPost 1
heliman1189

rrNovice

Michigan

My Posts: All  Forum  Topic

I need some help i bought a predator gasser this late fall and have not got to fly it in tell it warms up any way im going to use coliman fuel and in the zenoah it says to mix the oil 32-1 but i got some amsoil saber packs which is 100:1 and i would put one of these 1.5oz packs to 1-gal is that going to be to lean or can i run it at that mix please help do not want to hurt the motor thanks

Motor is broke in all ready

PM  EMAIL  GALLERY  Attn:RR
03-11-2010 09:08 PM  8 years agoPost 2
BeltFedBrowning

rrKey Veteran

Kansas City

My Posts: All  Forum  Topic

Is it new enough that it has not been properly broken in?

PM  EMAIL  GALLERY  Attn:RR
03-11-2010 11:01 PM  8 years agoPost 3
Gearhead

rrMaster

Vt

My Posts: All  Forum  Topic

I wont suggest a ratio but please don't mix at 100 to 1, even the better (RC Plane) Engine guys will tell you not to mix at 100 to 1 for your Gasser Planes, and Gasser Helis run hotter !!! do a search on this page and you will get a lot of info..

Jim
Buzz Buzz Buzz

PM  EMAIL  GALLERY  Attn:RR
03-11-2010 11:10 PM  8 years agoPost 4
oldfart

rrProfessor

Vancouver, Canada

My Posts: All  Forum  Topic

I have over 250 flights on my Predator w/G231 and have always used a 65:1 ratio of the Amsoil 100:1 oil. Even for break in - first two gallons of easy flying and sport aerobatics before any 3D.

This summer I might try going 75:1 but have not decided yet.

Your milage may vary.

Phil

PM  EMAIL  GALLERY  Attn:RR
03-11-2010 11:12 PM  8 years agoPost 5
lejon

rrVeteran

Las Vegas, Nevada

My Posts: All  Forum  Topic

Ratio's
Heliman1189, as the Wasp said there are many posts and threads on here about oil ratios.

If the engine is brand new (never been run) then you might want to consider running at least 4 oz of a non-sysntehtic oil for at least 1 gallon. Some here on the forum use Amsoil after the breakin gallon and use between 2 and 3.2 oz per gallon. the average is probably a 40 to 1 ratio which is 3.2 oz per gallon.

You will find that someone here has run just about any brand and any ratio. Some have had tremendous sucess and others not so much.

Best bet is to find out if it is a stock engine or custom and either go with 4 for breakin and 3.2 for after or for custom go with what the builder / customizer recommends.

Good luck

Lejon

Personally I go with 4 oz of lawnboy ashless for breakin and 3.2 of Amsoil there after in my TRM (231 & 260) motors and for my Wally (27)motor I use Mercruiser non-synthetic and afterwards their premium mix.

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 501 views TOPIC CLOSED
HomeAircraftHelicopterGasser Model RC HelicoptersOther › Help with oil
03-12-2010 12:09 AM  8 years ago •• Post 6 ••
rbort

rrProfessor

Franklin, MA - USA

My Posts: All  Forum  Topic

Oil
You need to put at LEAST 2 packets to one gallon of gas. That will give you like 43.6:1 mixture.

-=>Raja.

MA 1005 Hanson 280, 4210 flts
Spectra 27 3DMax, 3288 flts
Whiplash V1-2 Hanson 300, 1570 flts
Whiplash V2 Hanson 300, 402 flts

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
03-12-2010 11:06 AM  8 years agoPost 7
heliman1189

rrNovice

Michigan

My Posts: All  Forum  Topic

oil
Thanks for all your help i think i will run on the richer side 4oz per gal will be safe

Thank you

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 501 views TOPIC CLOSED
HomeAircraftHelicopterGasser Model RC HelicoptersOther › Help with oil
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Monday, July 16 - 3:52 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online