RunRyder RC
WATCH
 1 page 558 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsOther › Multigov with vbar
03-10-2010 05:25 AM  8 years agoPost 1
Ringo Ranger

rrVeteran

Honolulu, Hawaii USA

My Posts: All  Forum  Topic

Is there anybody here knows how to setup bank of the vbar with multigov.

If there s any leads of this please let me know. Thanks..

PM  EMAIL  GALLERY  Attn:RR  Quote
03-10-2010 05:44 AM  8 years agoPost 2
cdrking

rrElite Veteran

Seattle

My Posts: All  Forum  Topic

Not sure exactly what your are asking but I run a Muli-gov with a V-bar. The RPM's/idle up speeds are independent from bank switching in the V-stabi software. The idle up RPM will be set using the multi-gov programmer and the V-bar bank switching is done with mixes on a DX7 for example.

I normally just use two bank switches at most in the V-bar. If I remember correctly I used aux 2. Bank 0 is used for flying and Bank 1 I use for testing.

Jeff

To hover is divine, the alternative is rather PLANE.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-10-2010 06:16 AM  8 years agoPost 3
Ringo Ranger

rrVeteran

Honolulu, Hawaii USA

My Posts: All  Forum  Topic

Thank you Jeff. I think I did that aux2 setup before. Just to make sure that's why I asked. Tnx

Ringo

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 558 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsOther › Multigov with vbar
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, August 14 - 8:03 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online