RunRyder RC
WATCH
 1 page 451 views Post Reply
02-27-2010 04:25 AM  10 years ago
Topic Vote0Post 1
raptormandan

rrApprentice

springhill florida

MyPosts All Forum Topic
500t gyro
ive tried all that i know...searched the forums and still cant get this gyro settled down.....soon as i put it in hh...freakn thing drifts....then i try a little subtrim....the servo bounces at the end of the stroke....dont get it...anybody help...7c 2,4 radio..
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-27-2010 11:14 AM  10 years ago
cbflys

rrVeteran

Nesconset, NY - USA

MyPosts All Forum Topic
The 500T gyro doesn't 'sense' neutral. You'll need to put the gyro in RATE mode and use the rudder sub-trim to get the gyro to stop moving. Then, make sure you fly in RATE mode and adjust for any drift with the t/r linkage. Once its flying OK in RATE mode, then switch it over to HH mode.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-27-2010 11:56 AM  10 years ago
nivlek

rrProfessor

Norfolk England

MyPosts All Forum Topic
You'll need to put the gyro in RATE mode and use the rudder sub-trim to get the gyro to stop moving.
No , you need to select Tail Lock mode and use sub-trim to stop the servo from creeping . Then , in rate mode , hover the heli and adjust the linkage length to trim the tail .

From the manual :

Trimming Neutral with Sub-Trim
When in tail lock mode, the servo arm may "creep" or move
slightly. This movement is normal, and can be corrected by
changing the sub trim value in your radio system for the
rudder channel.
At the end of the day , it gets dark .
SHARE  PM  EMAIL  Attn:RR  Quote
02-27-2010 01:46 PM  10 years ago
cbflys

rrVeteran

Nesconset, NY - USA

MyPosts All Forum Topic
Nivlek is correct, my mistake. You need to be in HH mode to set the sub-trim. Guess that's what happens when you answer questions way too early in the morning
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-27-2010 03:20 PM  10 years ago
raptormandan

rrApprentice

springhill florida

MyPosts All Forum Topic
500
i got it ...thanks everyone.....yeeeaaaahhhhh...now lets go fly
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 451 views Post Reply
Print TOPIC

 2  Topic Subscribe

Thursday, December 3 - 7:48 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online