RunRyder RC
WATCH
 1 page 531 views Post Reply
Home✈️Aircraft🚁HelicopterThunder TigerRAPTOR 50 › TT metal Hub Slider Ring question
02-27-2010 03:52 AM  10 years ago
Topic Vote0Post 1
RaptorMan23

rrKey Veteran

Sioux City, IA

MyPosts All Forum Topic
TT metal Hub Slider Ring question
TTRPV0492 Thunder Tiger Raptor 30/50 Hub Slider Ring

^^^^^^

Is this slider SUPPOSED to have a metal sleeve inside of it to make it fit the mainshaft?? I see that heliproz doesnt include this sleeve??? Am I missing somthing here?? My slider had a sleeve inside of it and I found it was broken after taking the head apart

Talking about this if you dont know what Im describing

http://www.readyheli.com/ProductDet...PV0492&CartID=2
If you only have to bend over once to pick it up it's a good landing.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-27-2010 04:03 AM  10 years ago
Heli 770

rrProfessor

USA.

MyPosts All Forum Topic
It was made to slide onto the bottom of the metal main hub and tightens on it.
SHARE  PM  EMAIL  Attn:RR  Quote
02-27-2010 04:08 AM  10 years ago
RaptorMan23

rrKey Veteran

Sioux City, IA

MyPosts All Forum Topic
Thanks for the reply, I just looked and your right, the rest of that sleeve is jammed up inside the head block, know of anywhere that would sell just that sleeve??? Only other option would be to buy a new hub, dont really want to do thatIf you only have to bend over once to pick it up it's a good landing.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-27-2010 04:11 AM  10 years ago
RaptorMan23

rrKey Veteran

Sioux City, IA

MyPosts All Forum Topic
Or is the sleeve actually part of the hub?If you only have to bend over once to pick it up it's a good landing.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-27-2010 04:20 AM  10 years ago
Heli 770

rrProfessor

USA.

MyPosts All Forum Topic
Yes, it's the bottom of the main hub.
SHARE  PM  EMAIL  Attn:RR  Quote
02-27-2010 04:21 AM  10 years ago
RaptorMan23

rrKey Veteran

Sioux City, IA

MyPosts All Forum Topic
yikes........

Glad I found out now, thats gonna be a spendy replacement....at least it will be a shiny one
If you only have to bend over once to pick it up it's a good landing.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-27-2010 04:23 AM  10 years ago
Heli 770

rrProfessor

USA.

MyPosts All Forum Topic
Time to upgrade too the Titan SE head.
SHARE  PM  EMAIL  Attn:RR  Quote
02-27-2010 04:28 AM  10 years ago
RaptorMan23

rrKey Veteran

Sioux City, IA

MyPosts All Forum Topic
Im gonna look, I really dont want to spend $90 on a new metal hub but Ill take a look anyhowIf you only have to bend over once to pick it up it's a good landing.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-27-2010 04:51 AM  10 years ago
RaptorMan23

rrKey Veteran

Sioux City, IA

MyPosts All Forum Topic
Whats with the two holes for the buda bolt on the titan se hub? For different pitch throws? Not bad for $70If you only have to bend over once to pick it up it's a good landing.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-27-2010 04:58 AM  10 years ago
Heli 770

rrProfessor

USA.

MyPosts All Forum Topic
You need the SE main shaft with the same two holes in it and it uses a 3.5mm. gear bolt on the bottom.
SHARE  PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 531 views Post Reply
Home✈️Aircraft🚁HelicopterThunder TigerRAPTOR 50 › TT metal Hub Slider Ring question
Print TOPIC

 0  Topic Subscribe

Friday, November 27 - 11:51 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online