RunRyder RC
WATCH
 1 page 467 views Topic Closed
02-26-2010 12:47 AM  10 years ago
Topic Vote0Post 1
jac5304

rrNovice

Mount Juliet, Tn - USA

MyPosts All Forum Topic
Gv-1 and YS 50
Hello everyone,
I have a new YS50 on a new trex 600 with a Gv-1 governor and was wandering if someone could answer a question for me. I have the gear ratio in the gv-1 set a 8.5. This is what the manual says it is. When I fly in normal mode with the throttle stick a little above center (hovering)thenswitch to idle 2 (gv-1 on) the engine seems to slow down. I have the rotor speed set to 1950 rpm in the gv-1. The throttle is only open about 60% while I,m hovering. I don't have a tach but I would not think the rotor is spinning more than 1950 rpm at 60% throttle. I'm pretty sure the gv-1 is working because it will keep a consistant head speed.
SHARE  PM  EMAIL  GALLERY  Attn:RR
02-26-2010 01:18 AM  10 years ago
rcmike

rrVeteran

Dickson, TN

MyPosts All Forum Topic
You don't happen to have two magnets on the main gear do you?
SHARE  PM  EMAIL  GALLERY  Attn:RR
02-26-2010 01:31 AM  10 years ago
jac5304

rrNovice

Mount Juliet, Tn - USA

MyPosts All Forum Topic
no just one
SHARE  PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 467 views Topic Closed
Print TOPIC

 1  Topic Subscribe

Saturday, November 28 - 4:18 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online