RunRyder RC
WATCH
 1 page 421 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Servo - Gyro - Gov - Batt › Futaba 7C 2.4ghz & Revlock RL10 Governor questions
02-25-2010 04:17 PM  10 years ago
Topic Vote0Post 1
cadwarrior

rrVeteran

Canada

MyPosts All Forum Topic
Futaba 7C 2.4ghz & Revlock RL10 Governor questions
hi,

I bought a raptor 90 with the transmitter (both used and already setup).

The governor speed is setup to 15500 RPM (motor) with a gear ratio of 8.27. so the head speed is around 1874 RPM.

my question is: What does means the % enter into the transmitter into the governor setup??, how it will affect the head speed??, do I need the remote channel or can I unplug it?,

here is the setup in governor option into the transmitter:

setup on switch ''E'' (idle up)

normal: 50%
idle up 1: 66%
idle up 2: 27%

Thanks!
SHARE  PM  EMAIL  Attn:RR  Quote
02-25-2010 04:32 PM  10 years ago
jsenicka

rrProfessor

Eagle River, WI

MyPosts All Forum Topic
You need the remote.
The percentage show on the radio equates to where the servo signal on the gain channel is.
On the ground, with engine off, power up your gear.
Push the set button once to bypass sensor test on the governor.

Flip to idle 1.
Now go mes with the percentage on gain. See what the lights do.
Quick way to learn
Jim Senicka
Team Manager, GrandRC Flight Team
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-26-2010 02:30 PM  10 years ago
cadwarrior

rrVeteran

Canada

MyPosts All Forum Topic
thanks for your answer,

so this value is the offset adjustment for differents target RPM? instead of adjusting it manually on the governor?

thanks
SHARE  PM  EMAIL  Attn:RR  Quote
02-26-2010 02:55 PM  10 years ago
z11355

rrMaster

New England

MyPosts All Forum Topic
right. once you attach the remote lead to a spare rx channel, the speed adjustments are made on the tx. you use the LEDs and the chart to figure out what range and the exact speed within that range.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 421 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Servo - Gyro - Gov - Batt › Futaba 7C 2.4ghz & Revlock RL10 Governor questions
Print TOPIC

 0  Topic Subscribe

Wednesday, December 2 - 3:33 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online