RunRyder RC
WATCH
 1 page 433 views Post Reply
Home✈️Aircraft🚁Helicoptere-AlignT-REX 600 › esc question
02-22-2010 08:52 PM  10 years ago
Topic Vote0Post 1
love for scale

rrVeteran

Omaha, Nebraska U.S.A.

MyPosts All Forum Topic
esc question
i have an older trex 600e with the esp motor and 100amp esc. for govener mode, i still use the throttle curve? correct? i read in a mag to do a flat line accrosss like 80% all the way from low to high. wouldnt this cause instant rotor engaement once i turn on the heli?!?!?!. killing me and shredding the gears at low stick?!?!?!?! also by using the throttle curve in govener mode, what makes govenor mode any different then non-govener mode?

any recomendations for either throttle curve or setting govenor "curve?"? keep in mind i am not doing any 3D...scale or general flying only.

thanks
greg
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-22-2010 10:08 PM  10 years ago
Evan D

rrApprentice

Charlotte, NC

MyPosts All Forum Topic
Down load the manual for the e or ESP and there is a section on the programing. In governor mode yes you can use a straight across number below 100% and the ESC makes up for it to get you the right head speed. Without governor mode straight across 80% is just wrong. You want a curve in normal mode and maybe flat line across in idle up but it should be 100%. Using a straight 80% is hard on the ESC.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2010 01:33 AM  10 years ago
Spitfire1

rrElite Veteran

Perth Australia

MyPosts All Forum Topic
wouldnt this cause instant rotor engaement once i turn on the heli?!?!?!.
Soft start, you can either click instantly into idle up, or start in normal mode with 0 inh 80 inh 100.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2010 07:35 PM  10 years ago
love for scale

rrVeteran

Omaha, Nebraska U.S.A.

MyPosts All Forum Topic
So+80%25+is+hard+on+esc+in+normal+mode+but+ok+in+govenor+mode.+Correct%3F++And+soft+start+will+slowly+spool+blades%3F
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-24-2010 03:13 AM  10 years ago
Spitfire1

rrElite Veteran

Perth Australia

MyPosts All Forum Topic
Forgot to mention, gov mode doesent work properly with Align esc`s, you have to use a flat curve.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 433 views Post Reply
Home✈️Aircraft🚁Helicoptere-AlignT-REX 600 › esc question
Print TOPIC

 3  Topic Subscribe

Tuesday, December 1 - 2:09 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online