RunRyder RC
WATCH
 1 page 1357 views Post Reply
Home✈️Aircraft🚁Helicoptere-Elec-Helicopters New or Limited ActivityNext-D › Best way to check pitch for flybarless?
02-22-2010 05:35 PM  10 years ago
Topic Vote0Post 1
butters149

rrApprentice

monterey park, ca

MyPosts All Forum Topic
Best way to check pitch for flybarless?
Hi,

Just wanted to know what is the best way to check pitch for flybarless?
SHARE  PM  EMAIL  Attn:RR  Quote
02-22-2010 09:43 PM  10 years ago
Buzzin Brian

rrProfessor

College Station, Texas

MyPosts All Forum Topic
Take the head button off and tape a flybar to the top of the head?? Just an idea.

Brian
Build it, fly it, crash it. Repeat as often as needed.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-22-2010 09:55 PM  10 years ago
Justin Stuart (RIP)

rrMaster

Plano, Texas

MyPosts All Forum Topic
I use a Wixey angle gauge:

http://www.readyheli.com/iGaging_An...e_p/c025014.htm
Avant RC
Scorpion Power Systems
Thunder Power RC
Kontronik Drives
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-28-2010 10:13 PM  10 years ago
CF_Machete

rrApprentice

Raritan, NJ, USA

MyPosts All Forum Topic
I use a Wixey angle gauge
+1
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-01-2010 03:24 AM  10 years ago
butters149

rrApprentice

monterey park, ca

MyPosts All Forum Topic
so this cube goes directly on the blade itself? Do I need 1 or 2? So this would eliminate me using the pitch gauge?
SHARE  PM  EMAIL  Attn:RR  Quote
03-01-2010 11:58 AM  10 years ago
zmooth

rrApprentice

Athens/Greece

MyPosts All Forum Topic
+1 to Wixey from here too
Won't stay level directly on a blade though, one way around it is to mount it on some old pitch gauge. Or if the blade grip is flat it can go there too. You just need one, just mount it on the boom or somewhere vertical on the heli and zero it, then it's good to go. You don't even need a level table !
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-01-2010 12:09 PM  10 years ago
DALEPABAJO69

rrApprentice

osceola,CM,SL

MyPosts All Forum Topic
Yea, I agree with Buzz tape the flybar to the head button or just order the flybar holder from Align part #HN6115 it's only $9.00 not expensive and very effective.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-02-2010 06:00 AM  10 years ago
lloyd

rrKey Veteran

Perth,Australia (South African)

MyPosts All Forum Topic
Use a level and draw a pencil line on the wall behind your heli ...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-02-2010 06:21 AM  10 years ago
butters149

rrApprentice

monterey park, ca

MyPosts All Forum Topic
which pitch gauge would u guys recommend for mounting that igage?
SHARE  PM  EMAIL  Attn:RR  Quote
03-02-2010 08:52 AM  10 years ago
zmooth

rrApprentice

Athens/Greece

MyPosts All Forum Topic
I think a paddle alignment tool is better, I used the CN2050 Century Paddle Gauge, they are wide enough to fit wide-chord 700 blades easily. Tried the K&S paddle tool but wasn't wide enough.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1357 views Post Reply
Home✈️Aircraft🚁Helicoptere-Elec-Helicopters New or Limited ActivityNext-D › Best way to check pitch for flybarless?
Print TOPIC

 3  Topic Subscribe

Thursday, December 3 - 7:53 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online