RunRyder RC
WATCH
 3 pages [ <<    <     1      2     ( 3 )    >    >> ] 2987 views POST REPLY
HomeAircraftHelicopter
e-
Miniature Aircraft Whiplash & Furion 6
› Resurrecting an Ion X 1 single stage from the past
04-26-2010 07:42 AM  8 years agoPost 41
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

My Posts: All  Forum  Topic

hey, look at the voltage, 10S 42 volts and dropped to 40 1/2 volts for what 3 mins

PM  EMAIL  GALLERY  Attn:RR  Quote
04-26-2010 06:36 PM  8 years agoPost 42
CNCAddict

rrApprentice

Newport, N.C.

My Posts: All  Forum  Topic

Hey Tony,

I think it's the blue line that is the commanded power from the ESC to the motor. The black one is your receiver output to the ESC. Maybe Carlo has an idea why it's all over the place? Seems like there are some angry gremlins in your machine!

PM  EMAIL  GALLERY  Attn:RR  Quote
04-27-2010 09:43 PM  8 years agoPost 43
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

My Posts: All  Forum  Topic

Hey David, huh? sure dont seam like no grimlins in the system. Acts way better than that schulze.
I have the 4030-2.5Y in it now, hoping for a warm day soon to test it outs, YEH!

PM  EMAIL  GALLERY  Attn:RR  Quote
04-28-2010 07:36 AM  8 years agoPost 44
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

My Posts: All  Forum  Topic

Hey, OK there David and Carlo, found the problem, on my 14MZ I have always copied a model to start a new one! its way easy, I missed channel selections, had 2 throttles , channel 2 and channel 6, and yep both being alittle different, with the high KV motor man did it show up

thanks for the heads up

PM  EMAIL  GALLERY  Attn:RR  Quote
04-28-2010 07:58 AM  8 years agoPost 45
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

My Posts: All  Forum  Topic

heres the 4030-2.5Y

PM  EMAIL  GALLERY  Attn:RR  Quote
04-29-2010 05:00 AM  8 years agoPost 46
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

My Posts: All  Forum  Topic

well , I sure was hoping that it was fixed, but its still there, I think I will try fixed end points now, still bothering me, anyone got a clue?

PM  EMAIL  GALLERY  Attn:RR  Quote
04-29-2010 07:33 AM  8 years agoPost 47
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

My Posts: All  Forum  Topic

hey, well, the performance is bad with the high KV motor, but on the graph its getting straighter, so I changed the setting on high gov from 1600 to 1700 , up the gov gain to 20 and changed the 12 PWM to outrunner and see what it looks like

PM  EMAIL  GALLERY  Attn:RR  Quote
04-30-2010 03:55 AM  8 years agoPost 48
Eco8gator

rrElite Veteran

Palm Beach, FL

My Posts: All  Forum  Topic

Tony

Outrunner mode is not so good, don't use it.

Keep it on 16KHz, and use set RPM mode. Type in the pole count, gear ratio, and cell count. From there setup your Tx throttle modes so you can select from the 3 flight modes.

That heli should be screaming like a bat out of hell...

Ive run the motor your using on another heli with a castle ESC and it was very powerful. It definitally had lots of action.

Carlo

Xera Motors
ProBar
Minicopter
Thunder Power

PM  EMAIL  GALLERY  Attn:RR  Quote
04-30-2010 04:43 AM  8 years agoPost 49
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

My Posts: All  Forum  Topic

I think I found it, I have a mix some where in the radio look at the servo monitor to see it when in idle 1, I cant find it for sheet! I will start another model on my radio from scratch

PM  EMAIL  GALLERY  Attn:RR  Quote
05-16-2010 03:18 AM  8 years agoPost 50
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

My Posts: All  Forum  Topic

well, I redone the radio and MAN! I ended up which seamed a flat out wide open throttle, flew it anyway, HS seamed around 2000 ish, boy does it move, glad it did run wide open, if in gov mod it might have shut down due to high amps, heres the lastest graph

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 3 pages [ <<    <     1      2     ( 3 )    >    >> ] 2987 views POST REPLY
HomeAircraftHelicopter
e-
Miniature Aircraft Whiplash & Furion 6
› Resurrecting an Ion X 1 single stage from the past
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Monday, December 10 - 12:04 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online