I am still having trouble with setup.
Could you describe how to start setting up CC ESC - step by step?
This is my first time using CC ESC.
I changed end point on the radio to 50% 50%.
Then, I put thottle on high and connected the esc.
As soon as I connect the esc to the battery, it starts beeping and few seconds later the red LED turned to yellow with a beep after about 30 sec.
Then, I disconnected the battery and put low stick on the radio and reconnected the battery. However, at this point the red led doesn't truned to yellow and nothing's going on (No Beep, No Yellow LED)
"Plug in the ESC, bump up the high point until the ESC beeps, probably going to be over 100 somewhere. Add a couple more clicks." what does it mean over 100 somewher?