RunRyder RC
WATCH
 1 page 1666 views POST REPLY
HomeAircraftHelicopterFuel-Helicopters New or Limited ActivityOutrage › what align servo on the gp750
02-07-2010 02:18 AM  8 years agoPost 1
helibro

rrVeteran

hamilton, ohio

My Posts: All  Forum  Topic

looks like there are a couple of choices of servos for the gp750 what is everyone using?

hey! were is the reset button!

PM  EMAIL  Attn:RR  Quote
02-07-2010 02:19 AM  8 years agoPost 2
george0079

rrElite Veteran

USA

My Posts: All  Forum  Topic

whatever tail servo you prefer.

Hell... I can fix that.
Uh oh..
Nope.
It's ***ked!!!
RE-KIT!!!!!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2010 02:46 AM  8 years agoPost 3
LONEWOLF2440

rrElite Veteran

MYRTLE BEACH S.C

My Posts: All  Forum  Topic

8900g here

MIKADO LOGO 600 TREX 550

PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2010 02:59 AM  8 years agoPost 4
flyhud

rrApprentice

Allen, TX

My Posts: All  Forum  Topic

Align DS650, check the specs and the reviews, incredibly hard to beat for the $$.

I dont always fly helis, but when I do, I prefer Outrage.The most interesting man in the world

PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2010 03:12 AM  8 years agoPost 5
aussie_g

rrVeteran

Travelers Rest, South Carolina, USA

My Posts: All  Forum  Topic

Align DS650, check the specs and the reviews, incredibly hard to beat for the $$.
Judging from the amount of broken heli's I have seen from the align tail servo's failing - I think they are way overpriced..

And this isnt from reviews or opinions - but failures seen with my own eyes.

Gareth

PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2010 03:19 AM  8 years agoPost 6
helibro

rrVeteran

hamilton, ohio

My Posts: All  Forum  Topic

well are the 610's good for cyclic then or have they had alot of failutes also?

hey! were is the reset button!

PM  EMAIL  Attn:RR  Quote
02-07-2010 03:24 AM  8 years agoPost 7
george0079

rrElite Veteran

USA

My Posts: All  Forum  Topic

610's are fine. I've been running them for 2 years now

Hell... I can fix that.
Uh oh..
Nope.
It's ***ked!!!
RE-KIT!!!!!

PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2010 03:31 AM  8 years agoPost 8
aussie_g

rrVeteran

Travelers Rest, South Carolina, USA

My Posts: All  Forum  Topic

I have to agree with the 610's being fine for the cyclics...

I know of quite a few guys who have put many flights on the 610's, even at 8v and they fly very well.

Its only the tail servo's that I have an issue with - I wont touch them

Gareth

PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2010 05:51 AM  8 years agoPost 9
flyhud

rrApprentice

Allen, TX

My Posts: All  Forum  Topic

IMHO the 620 and the 650 are good servos, I smoked a 620 on the tail of my trex 600 last year, but I was not using the regulator as recommended. Since this happened I have used the align 5.1 stepdown regulator and have had very good results, still very fast and temps are good. these servos are not designed to run at higher voltages on the tail. If you run them at the higher voltages, I would agree they are no good.

I dont always fly helis, but when I do, I prefer Outrage.The most interesting man in the world

PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2010 01:27 PM  8 years agoPost 10
dialarotor

rrElite Veteran

Traverse City, Michigan

My Posts: All  Forum  Topic

Is 5.5volts too much ?
I have a nice regulator system then puts out a constant 5.5volts.
Can the DS620 & DS650 tail servos handle that? Grabbing my umbrella for the opinion storm. I was even considering this same setup for Futaba 9256 and 9254 tail servos. In the past there have been 5.1v and 5.3v regulators, so is this tiny bit more(5.5v) a problem?

RapRexSynLogo Pilot

PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2010 01:57 PM  8 years agoPost 11
helibro

rrVeteran

hamilton, ohio

My Posts: All  Forum  Topic

i was told that you could run the gp750 and 650 servo on 6 volts? it says they can handle 6vs

hey! were is the reset button!

PM  EMAIL  Attn:RR  Quote
02-07-2010 03:58 PM  8 years agoPost 12
flyhud

rrApprentice

Allen, TX

My Posts: All  Forum  Topic

I guess I have taken the better safe than sorry approach, because as stated above I overheated a 620 on the tail of my t600n, running at 5.8v. Since that I have been a bit spooked about running any of the Align servos on the tail at the anything higher than 5.1v. I am using the Align step down regulator with the 650 servos on both of my nitros and have had zero issues, and at that voltage they are still plenty fast. I am using a set of 610's and 620's (cyclics) on my nitros running at 5.8v without issues. I think 7 bucks for the step down is cheap insurance.

http://www.helidirect.com/align-51v...ator-p-7099.hdx

I dont always fly helis, but when I do, I prefer Outrage.The most interesting man in the world

PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2010 07:02 PM  8 years agoPost 13
helibro

rrVeteran

hamilton, ohio

My Posts: All  Forum  Topic

i agree i will run a step down on the tail servo but on the 610s they are ok right off the 2in1 correct?

hey! were is the reset button!

PM  EMAIL  Attn:RR  Quote
02-07-2010 09:19 PM  8 years agoPost 14
flyhud

rrApprentice

Allen, TX

My Posts: All  Forum  Topic

Yes the Align 2 in 1 puts out 5.8v, no problem for the 610's on the cyclic.

I dont always fly helis, but when I do, I prefer Outrage.The most interesting man in the world

PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2010 11:02 PM  8 years agoPost 15
theflyingman2

rrApprentice

Winter Haven, FL USA

My Posts: All  Forum  Topic

Ive been using the align 650 with a inertia gyro for about 50 flights, and a Quark gyro for about 20.. no problems at all. a spectrum 7100R is driving my setup. no other regulators on the heli.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-14-2010 04:24 PM  8 years agoPost 16
helibro

rrVeteran

hamilton, ohio

My Posts: All  Forum  Topic

what would be better for cyclic 610's or 620's

hey! were is the reset button!

PM  EMAIL  Attn:RR  Quote
02-15-2010 05:37 AM  8 years agoPost 17
flyhud

rrApprentice

Allen, TX

My Posts: All  Forum  Topic

I'm running the 620's on my velocity they are a faster than the 610's , but a little less torque. I have a set of 610's on my trex 600 they have performed well. I would probably go with the 620's, just because of the speed advantage, they provide plenty of torque for a 50 size machine.

I dont always fly helis, but when I do, I prefer Outrage.The most interesting man in the world

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2010 10:53 PM  8 years agoPost 18
Mioca

rrApprentice

Budokai Tenkaichi

My Posts: All  Forum  Topic

+1 for the ALIGN DS650 cheap and fast.

PM  EMAIL  Attn:RR  Quote
03-07-2010 11:13 PM  8 years agoPost 19
jelkins

rrApprentice

Oklahoma City, OK - USA

My Posts: All  Forum  Topic

I have used 620 all around on my #2 700 with many gallons of fuel through it all running on 8v and have not had a problem.
I use the align gov, and a solid-g.

I recently upgraded it with a AR7100 and align 3G flybarless. Have about a gallon through it now with no problems.


www.collectiverc.com
www.HOBBIESandRC.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 1666 views POST REPLY
HomeAircraftHelicopterFuel-Helicopters New or Limited ActivityOutrage › what align servo on the gp750
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Monday, September 24 - 5:05 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online