RunRyder RC
WATCH
 1 page 804 views POST REPLY
02-06-2010 04:10 AM  8 years agoPost 1
jmc67

rrApprentice

Dutchess County, NY

My Posts: All  Forum  Topic

Hi all,

I ordered the 4G6 and arrived today. This came with the wk2801 tx. I also have the 4#3B eqiuped with the 2401 tx but since the 2801 is programmable, I'd prefer to use one tx for both helis. I setup as best I can the 2801 tx to work with the 4#3 but the main motor and tail motor seem dead. The servos work correctly and move in the right direction. Running the 4#3 with the original 2401 tx everything works as it should. Does anyonw know the correct way to setup the 2801 tx to work with the 4#3?

cheers

PM  EMAIL  Attn:RR  Quote
02-06-2010 05:22 AM  8 years agoPost 2
AtTheCross

rrVeteran

Southern CA

My Posts: All  Forum  Topic

you have to bind the 2801 to the 4#3B in 2401 mode of the radio

ASI Green Mongoose CY29RC - 67 flights

PM  EMAIL  GALLERY  Attn:RR  Quote
02-06-2010 05:30 AM  8 years agoPost 3
jmc67

rrApprentice

Dutchess County, NY

My Posts: All  Forum  Topic

I did that but only the servos work. Motors do not. I checked the motors with the 2401 tx and they worked.

PM  EMAIL  Attn:RR  Quote
02-06-2010 05:38 AM  8 years agoPost 4
AtTheCross

rrVeteran

Southern CA

My Posts: All  Forum  Topic

make sure throttle is not reversed. and that the trim is down, not trying to be insulting if you're experienced. I have 4#3B with the 2401 rx and the 2601 rx and I know it works

ASI Green Mongoose CY29RC - 67 flights

PM  EMAIL  GALLERY  Attn:RR  Quote
02-06-2010 10:58 AM  8 years agoPost 5
Heli_KV

rrKey Veteran

Ottawa, Canada

My Posts: All  Forum  Topic

Second this. My 4#3 and 4G6 both work with 2801.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-06-2010 05:17 PM  8 years agoPost 6
jmc67

rrApprentice

Dutchess County, NY

My Posts: All  Forum  Topic

I got it working. Apparently an oversight on my part. Late night and tired trying to get this to work does not mix. All is good now.

Any good recommended setup for agressive and tamed flying for the 4G6 besides what is on the manual? The 4G6 is stock for now and later will change the motor to something with more power.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 804 views POST REPLY
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, July 22 - 12:18 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online