RunRyder RC
WATCH
 1 page 1330 views POST REPLY
HomeRC & PowerAircraftHelicopterFlybarless Rotor Head SystemsOther › Align 3g and CCPM Perfect Regulators
02-05-2010 11:34 PM  8 years agoPost 1
Stealth

rrNovice

Rio de Janeiro - Brazil

My Posts: All  Forum  Topic

I'm wondering if someone here hooked up the align flybarless and Perfect regulator CCPM.
Any help would be very appreciated.

Trex250, 600ESP 4025-630 CC85HV 12S, E325 Cobra X9303 2.4

PM  EMAIL  Attn:RR  Quote
02-06-2010 05:46 PM  8 years agoPost 2
puma1824rrVeteran - Maryland, USA - My Posts: All  Forum  Topic

Should be like how u wire up a vbar...see attached pic

PM  EMAIL  GALLERY  Attn:RR  Quote
02-06-2010 07:35 PM  8 years agoPost 3
Tommy8275

rrVeteran

Mount Juliet, TN

My Posts: All  Forum  Topic

Puma1824 thats what Im going to wire mine with my Align 3G 700 with perfect regulator tomorrow .Hopefully they coming today. I might adjust to exactly 8.0V on my CCPM. I saw some post complain about got burn on their servo(8717) by using 8.0 volt on CCPM with Align 3G. I dont see why?

Tommy K

PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2010 04:32 AM  8 years agoPost 4
Tommy8275

rrVeteran

Mount Juliet, TN

My Posts: All  Forum  Topic

I tried to hook up my 3G with my perfect regulator this morning have no luck. no power going to 3G system at all . then I used my 2-1 align it was work (power up) I dont know why? Any idea

Tommy K

PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2010 09:04 AM  8 years agoPost 5
Stealth

rrNovice

Rio de Janeiro - Brazil

My Posts: All  Forum  Topic

I haven't tried yet... I'll post results as soon as my 3G arrives.

Trex250, 600ESP 4025-630 CC85HV 12S, E325 Cobra X9303 2.4

PM  EMAIL  Attn:RR  Quote
02-07-2010 02:33 PM  8 years agoPost 6
puma1824

rrVeteran

Maryland, USA

My Posts: All  Forum  Topic

I tried to hook up my 3G with my perfect regulator this morning have no luck. no power going to 3G system at all . then I used my 2-1 align it was work (power up) I dont know why? Any idea

Tommy K
Try testing the leads on both the servo side and RX side to see if you have any voltage when completely disconnected. Is the LED turning on when you flip the switch? You have the CCPM version right (3 servo leads + 3 RX leads)??

The RX side should have ~5v & the servo side is adjustable when powered up.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2010 05:01 PM  8 years agoPost 7
Tommy8275

rrVeteran

Mount Juliet, TN

My Posts: All  Forum  Topic

I did test the servo end of the lead it had voltage out 6.5v . This 6.5v was dial down from my perfect regulator to prevent from burning my system or servo. But still no power up to the 3G only RX
.

Tommy K

PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2010 05:45 PM  8 years agoPost 8
puma1824

rrVeteran

Maryland, USA

My Posts: All  Forum  Topic

I did test the servo end of the lead it had voltage out 6.5v . This 6.5v was dial down from my perfect regulator to prevent from burning my system or servo. But still no power up to the 3G only RX
.

Tommy K
Test the RX side (fixed voltage) of the perfect reg CCPM, which is the side that would provide power to the 3G.

IF you do have power on both ends, connect the 3G, then test the leads coming out of the 3G that would of been plugged into the RX. Basically test / verify power is being passed along the power bus through the 3G to the RX.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-08-2010 01:33 AM  8 years agoPost 9
Tommy8275

rrVeteran

Mount Juliet, TN

My Posts: All  Forum  Topic

Finally getting to work will test sometime next week when the weather getting better

Tommy K

PM  EMAIL  GALLERY  Attn:RR  Quote
02-08-2010 01:34 AM  8 years agoPost 10
puma1824

rrVeteran

Maryland, USA

My Posts: All  Forum  Topic

Finally getting to work will test sometime next week when the weather getting better

Tommy K
What was the issue?

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1330 views POST REPLY
HomeRC & PowerAircraftHelicopterFlybarless Rotor Head SystemsOther › Align 3g and CCPM Perfect Regulators
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Saturday, September 22 - 1:11 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online