RunRyder RC
WATCH
 1 page 892 views POST REPLY
HomeAircraftHelicopter
e-
Elec-Helicopters New or Limited Activity
Walkera › Need help setting up a walkera 60
02-05-2010 12:29 AM  8 years agoPost 1
heliopilot1

rrNovice

goliad,tx.

My Posts: All  Forum  Topic

Hey gang, im new to the walkera brand, and just took a walkera 60 in on trade and need to know which servo does what, so i can make sure they are plugged in to the right place in the receiver, because it is acting like it may have a 2 servos plugged in wrong. also, how is the stock radio supposed to be set up??? the instruction book is very vague! thanks!

PM  EMAIL  Attn:RR  Quote
02-05-2010 11:31 AM  8 years agoPost 2
copperclad

rrElite Veteran

NY

My Posts: All  Forum  Topic

Hi Heliopilot

here is a link to a thread that Buildem posted , it has the switch settings for the stock radio
https://rc.runryder.com/t560519p1/

set the switches to the positions Buildem shows in his thread

of coarse if you are looking from the rear of the heli , the swash should mimic the movement of the right stick , moving the right stick to the right should cause the swash to lean to the right , and moving the right stick forward should get the swash to lean forward

also unplug the main motor from the ESC , and you should see that as you move the left stick up and down , the swash should move up and down also , if the left stick causes the swash to tip , you still have problems

hope this is some help

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 892 views POST REPLY
HomeAircraftHelicopter
e-
Elec-Helicopters New or Limited Activity
Walkera › Need help setting up a walkera 60
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Sunday, July 15 - 10:33 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online