RunRyder RC
WATCH
 1 page 383 views TOPIC CLOSED
HomeAircraftHelicopterHelicopter Main Discussion › elevator/ mixed with Aux channel on DX7 question.
02-03-2010 12:40 AM  8 years agoPost 1
Spitfire1

rrElite Veteran

Perth Australia

My Posts: All  Forum  Topic

What Im trying to work out is If I mix my Aux channel to my elevator channel on my dx7 will my elevator trim and elevator subtrim still work on both elevators of an RC Lander f16 jet that uses 2 servos for each elevator.?

I only have one spare receiver in my little 3s f35, and my f16 lipo wont arrive for a week, so Im reluctant to put it into the f16 so at leastr i can fly the f35 for a few more days.

I know i can buy a servo reversing Y harness, but there not cheap and seem to be hard to get hold of any way.

The other thing is why could I not just put one of the servo horns on the other way round, the only prob I can see with that is it would not look as good?

Any help with the mixing apreciated, Il try post a pic of the servo setup in a few minutes, my main question is will the trim still work if I mix the ele channel with the aux channel.

Jason.

PM  EMAIL  GALLERY  Attn:RR
02-03-2010 12:50 AM  8 years agoPost 2
Spitfire1

rrElite Veteran

Perth Australia

My Posts: All  Forum  Topic

[/PHOTO]

This is not a picture of n RC lander f16 but the servos positions are the same only further outward so i could turn one of the servo horns around if I wanted.

For the record this is a pic of a lander jet:

PM  EMAIL  GALLERY  Attn:RR
02-03-2010 01:46 AM  8 years agoPost 3
Spitfire1

rrElite Veteran

Perth Australia

My Posts: All  Forum  Topic

Im gonna copy and paste this topic and move it over to off topics then close this one, it may look like like im double posting for a few minutes until I figure it out.

PM  EMAIL  GALLERY  Attn:RR
02-03-2010 01:49 AM  8 years agoPost 4
Spitfire1

rrElite Veteran

Perth Australia

My Posts: All  Forum  Topic

Now just to fihure out how to close

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 383 views TOPIC CLOSED
HomeAircraftHelicopterHelicopter Main Discussion › elevator/ mixed with Aux channel on DX7 question.
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Wednesday, November 14 - 3:23 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online