RunRyder RC
WATCH
 1 page 1121 views POST REPLY
HomeAircraftHelicopterBeginners Corner › Manual for Thunder power 610 Charger
02-02-2010 09:24 PM  8 years agoPost 1
Ausable

rrVeteran

Montreal, Quebec

My Posts: All  Forum  Topic

Does anyone know where I can get the above from.
Thanks for your help.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-02-2010 09:26 PM  8 years agoPost 2
USAF Retired

rrVeteran

North, TX

My Posts: All  Forum  Topic

Manual
Try to Google it, I'll bet you will find one.

Terry

PM  EMAIL  Attn:RR  Quote
02-02-2010 11:49 PM  8 years agoPost 3
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

Thunderpowerrc.com

PM  EMAIL  Attn:RR  Quote
02-03-2010 12:28 AM  8 years agoPost 4
Ausable

rrVeteran

Montreal, Quebec

My Posts: All  Forum  Topic

Manual for Thunder power 610 Charger
OK, I downloaded the manual. Now to set up a 3S 2200mAh 18C Lipo.
I am not sure how to set up.I know it is 3S but do i use 1.0A, I am using a power supply and have the set up as 11.0Volts.
I get a read out that a cell is over charged what do i need to do. Also what should it say on the mah left hand side readout ,it shows00075 I think.
I am new at this part of the hobby.
Can someone help me out.
Thanks again

PM  EMAIL  GALLERY  Attn:RR  Quote
02-03-2010 12:38 AM  8 years agoPost 5
thtoyman

rrKey Veteran

Gone ,Flying.

My Posts: All  Forum  Topic

Here loook at the botten of the page
http://www.rcdude.com/servlet/the-9...alancing/Detail

PM  EMAIL  GALLERY  Attn:RR  Quote
02-03-2010 01:05 AM  8 years agoPost 6
Ausable

rrVeteran

Montreal, Quebec

My Posts: All  Forum  Topic

Ok, this is what I seen the readout
Battery type-lipo
Lipo charge option-100% Charge
Lipo Dchg option cut off: 3.75V
Li/A1 IntCharge Time out:5 Min
Beeper option; On
Input PWR Option: LVC: 11.00 V
(I am using a Pro Peak 13.8 volt power suppy)
System Timeout max time: 2 Hour
These are my present settings.

Then I connect the batery and the readout shows
Lipo Charge 3s Pack C=1.00A
Lipo Discharge 3sPack D=0.25A
Charge 12.600V 0.41A
00008mAh The mAh is going up but it stops at
Ch-F 12.5756V- 00026mAh 0:0655
Is thsi normal
Thanks for everyone who is helping me out.
The battery that I am charging is a 3s 2200mAh 18C Lipo.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-03-2010 01:08 AM  8 years agoPost 7
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

Set your power supply to 12 volts. On the charger: Cell count 3, Current 2.2amps and press Enter.

PM  EMAIL  Attn:RR  Quote
02-03-2010 01:18 AM  8 years agoPost 8
Ausable

rrVeteran

Montreal, Quebec

My Posts: All  Forum  Topic

OK, I did that and the readout shows
F-12.551V 0.0A
00002mAh 0:00:18
Isn't the mAh to be as 2200mAh?

PM  EMAIL  GALLERY  Attn:RR  Quote
02-03-2010 01:35 AM  8 years agoPost 9
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

"Isn't the mAh to be 2200mAh?", No. The charger is only going to give you a reading of the mAh it puts back into the batt. pack.

PM  EMAIL  Attn:RR  Quote
02-03-2010 01:44 AM  8 years agoPost 10
Ausable

rrVeteran

Montreal, Quebec

My Posts: All  Forum  Topic

Ok, so when I fly then the mAh will be reduced and the the charger shoul show alot more mAh being put back into the battery.
You guys are greatfor helping me out with my questions. This is the reason why we don't give up with such a complex hobby, always so much to learn.
Thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1121 views POST REPLY
HomeAircraftHelicopterBeginners Corner › Manual for Thunder power 610 Charger
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, September 23 - 1:33 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online