RunRyder RC
WATCH
 1 page 791 views POST REPLY
HomeAircraftHelicopterRadio - Spektrum DSM › Binding problem
02-01-2010 02:08 PM  8 years agoPost 1
Helijockey

rrKey Veteran

150 miles from somewhere

My Posts: All  Forum  Topic

I have a JR 9 channel receiver with my DX9 and it always binds in a few seconds. Now I got a AR9000 for my new trex700 and it seems to take many attempts before it binds. Is this normal with the AR9000? I would hate to loose my trex700 due to the receiver

PM  EMAIL  Attn:RR  Quote
02-02-2010 07:09 PM  8 years agoPost 2
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

Hold the transmitter a few feet away from the model while it's linking.

Also if you're sitting on a metal bench or with metal shelves around that will cause issues.

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
02-03-2010 10:24 AM  8 years agoPost 3
Helijockey

rrKey Veteran

150 miles from somewhere

My Posts: All  Forum  Topic

Thanks BarracudaHockey

PM  EMAIL  Attn:RR  Quote
02-03-2010 02:35 PM  8 years agoPost 4
1275mini

rrKey Veteran

Wirral North West U.K.

My Posts: All  Forum  Topic

mine takes a bit to bind

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-03-2010 04:59 PM  8 years agoPost 5
CoronaL

rrKey Veteran

Winnebago IL

My Posts: All  Forum  Topic

check your satalitte reciever mount and the wire to that remote. If they are buggered, you can have increased link times.

Also, I would describe what you are experiencing as linking problems not binding problems. I personally think of binding is what you do when you "teach" the radio and Rx to talk to eachother with the Bind button on the Tx, and the bind plug in the Rx. After that is complete. When the items initialize, they are looking for link. Maybe I'm wrong in my terminology, but it's easier for me to keep it straight in my mind that way

Randy!!! I am the liquor

PM  EMAIL  GALLERY  Attn:RR  Quote
02-03-2010 05:13 PM  8 years agoPost 6
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

Thats exactly it.

Binding = receiver memorizing the GUID (Globally Unique ID) of the transmitter.

Linking = powering up your system and waiting for the link to establish.

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
02-03-2010 05:25 PM  8 years agoPost 7
trunkmunki

rrApprentice

Bangor

My Posts: All  Forum  Topic

I have had similar issues witth ar6100 rxs, and through (a lot) of trial and error I found if I was any where near my wireless router while it was on, or even my laptop with wireless on, it would either take a long time to link or just not link. Don't know what is around you but just a thought.

PM  EMAIL  Attn:RR  Quote
02-06-2010 02:47 AM  8 years agoPost 8
Helijockey

rrKey Veteran

150 miles from somewhere

My Posts: All  Forum  Topic

Actually since it was a new receiver and a new heli/setup I was trying to bind. That's what got me worried since it just wouldn't bind! Took me at least seven or eight attempts before it did but now it links up in just a few seconds

PM  EMAIL  Attn:RR  Quote
02-07-2010 02:50 AM  8 years agoPost 9
trunkmunki

rrApprentice

Bangor

My Posts: All  Forum  Topic

They just needed to get to know eachother first.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 791 views POST REPLY
HomeAircraftHelicopterRadio - Spektrum DSM › Binding problem
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Tuesday, July 17 - 3:28 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online