RunRyder RC
WATCH
 1 page 330 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › setting ATG speed using aux channel
02-01-2010 09:42 AM  8 years agoPost 1
Branzzz

rrVeteran

Singapore

My Posts: All  Forum  Topic

i'm using an ATG on an r90. i have the rpm at normal set at 1800rpm. however i can't get a higher speed on my idle ups using the aux2 mix on my jr 9x. here's the mix

AUX2-->AUX2 mix(triggered by idle up switch)
normal: +30
idle up 1: +90
idle up 2:+100

on this setting, the speed from normal to idleup1 is roughly the same, but on idleup2 it seems to go down to roughly 1500-1600rpm. i'm aiming for about 1850-1900 on idleup 2. what can i do?

Raptor 50V2
OS 50SX-Hyper
GY502/9253
Hitec 6975
Airtronics ERG-VB
JR 3810

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 330 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › setting ATG speed using aux channel
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Sunday, July 22 - 12:00 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online