RunRyder RC
 0  Topic Subscribe
WATCH
 1 page 646 views TOPIC CLOSED
HomeAircraftHelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Vibe 50 throttle set-up
01-21-2010 03:20 AM  8 years agoPost 1
mwf02

rrNovice

bainbridge,ga

My Posts: All  Forum  Topic

I need some help with my throttle set-up on my vibe.I understand about having servo arm and throttle arm at 90 degrees having the linkage measured from servo center to center of throttle arm.I get this done and set it up for half throttle and then cant get my endpoints right.My low endpoint has to be set at around 85 and then my high endpoint is around 125.Read that these settings should be within 5-10 points of each other.Also isnt the first mark on the carb the mechanical center of carb.Thanks in advance.

PM  EMAIL  GALLERY  Attn:RR
01-21-2010 04:48 AM  8 years agoPost 2
Sillyness

rrVeteran

Little Rock AR

My Posts: All  Forum  Topic

Move 1 spline on your servo arm and/or use subtrim to get both ATVs equal. Do all this with the throttle trim all the way down and a 0-25-50-75-100 throttle curve. Ignore the markings on the carb. You'll get her.

PM  EMAIL  GALLERY  Attn:RR
01-22-2010 10:55 PM  8 years agoPost 3
mwf02

rrNovice

bainbridge,ga

My Posts: All  Forum  Topic

Thanks its all straightened out know.Now i just got to figure out why it wont idle.Seems like the clutch is fully engaged even when idle trim is set at its lowest.Got to love the smell of a burnt liner.

PM  EMAIL  GALLERY  Attn:RR
01-23-2010 01:32 AM  8 years agoPost 4
mwf02

rrNovice

bainbridge,ga

My Posts: All  Forum  Topic

Problem solved.Guess thats what happens when its been over a year since you've flown a nitro.You forget everything.

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 646 views TOPIC CLOSED
HomeAircraftHelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Vibe 50 throttle set-up
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Friday, June 22 - 10:33 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online