RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 399 views TOPIC CLOSED
HomeAircraftHelicopterMain Discussion › trex 500 nitro( but helicopter question in general)
01-20-2010 01:17 AM  8 years agoPost 1
teddieitgolf

rrNovice

alabama

My Posts: All  Forum  Topic

I went to fly 2day and i don't fly with a club or anything.Also, i dont have anyone close to coach me so I'm self taught. Little, to far away. Anyways, today i went to fly and the helicopter just spun on the ground.It didnt have any lift to it . The tail was spinning. So, im kinda wondering... I did mess with my trottle curve but i just lowered the second point so. I just need some advise thanks.. I flew it the day before. Its belt driven and i did do a little re moving somethings around on my tail servo, but it was working fine.

PM  EMAIL  Attn:RR
01-20-2010 01:33 AM  8 years agoPost 2
Dave's Raptor

rrApprentice

Kennett, Mo USA

My Posts: All  Forum  Topic

If you lowered your throttle curve to much
you will change the transmitter stick point
of when the heli starts to hover. If you only
changed one positon it should lower your headspeed
at that point.

PM  EMAIL  GALLERY  Attn:RR
01-20-2010 01:40 AM  8 years agoPost 3
fenderstrat

rrProfessor

Aston,Pa

My Posts: All  Forum  Topic

i did do a little re moving somethings around on my tail servo, but it was working
if you moved the tail servo and you do a rate mode set up on your gyros,it may have thrown something off.are you still in HH?

which way is the heli spinning?have you checked belt tension?

Compass helis Support Team
PerformancePlusRC field rep
Mini Titan/SE
TEAM KBDD

PM  EMAIL  GALLERY  Attn:RR
01-20-2010 01:43 AM  8 years agoPost 4
dkshema

rrMaster

Cedar Rapids, IA

My Posts: All  Forum  Topic

Your post is not clear. Was the heli sitting still on the ground with the blades spinning, but going nowhere, or was the entire heli spinning on the ground?
i did do a little re moving somethings around on my tail servo, but it was working
What was a "little re moving somethings around" and what did it involve?

-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz

PM  EMAIL  GALLERY  Attn:RR
01-20-2010 02:28 AM  8 years agoPost 5
teddieitgolf

rrNovice

alabama

My Posts: All  Forum  Topic

thanks to all i got it figured out...
Guys thanks... for all the fast post. I figured it out. Figured out the tail is goin the wrong way.. clockwise.. So, im goin to fix the belt. THanks...

PM  EMAIL  Attn:RR
WATCH
 1 page 399 views TOPIC CLOSED
HomeAircraftHelicopterMain Discussion › trex 500 nitro( but helicopter question in general)
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, June 21 - 9:17 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online