RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 852 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Logo 500 › Logo 10 3D to Logo 500 3D
01-18-2010 08:00 PM  8 years agoPost 1
kelegba

rrNovice

Angers, France

My Posts: All  Forum  Topic

Hello Kelegba From Angers

is it possible to upgrade a Logo 10 3d to get a Logo 500??
I want to buy a Logo 500 DX and use my Logo 10 Upgrade
for example

thank you for your help

PM  EMAIL  GALLERY  Attn:RR  Quote
01-18-2010 08:01 PM  8 years agoPost 2
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

Yup, swap the head, tail, boom, and belt............Ron

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR  Quote
01-18-2010 08:13 PM  8 years agoPost 3
Jag72

rrProfessor

South of Boston

My Posts: All  Forum  Topic

Even better--
you can go this route also:
these are all the parts you need

Kaos frame
logo 500 .7mod herringbone main gear
herringbone pinion
Logo 10 one way will work if you remove 2mm from one side
logo 500 tail pulley
logo 500 boom and belt
logo 500 main shaft

everything else will work .....

PM  EMAIL  GALLERY  Attn:RR  Quote
01-18-2010 08:52 PM  8 years agoPost 4
jrvander

rrVeteran

Camp Foster, Okinawa japan

My Posts: All  Forum  Topic

Anthony,
Does the logo 10 one-way need to be turned over/inverted for this conversion? I remember reading that somewhere when the new frames first came out. Someone suggested that you could just press the one-way bearing out and re-install upside down while others said you had to buy the whole new unit.

- Jon

PM  EMAIL  GALLERY  Attn:RR  Quote
01-18-2010 08:59 PM  8 years agoPost 5
Jag72

rrProfessor

South of Boston

My Posts: All  Forum  Topic

one way
You can use the one way...

you just remove the brass bushings on the end and the one way slides right out...then you just flip it over.

I am using a logo 10 one way in one of my logo 500's right now...

I have an extra logo 10 one way...I will take pics of it next to the logo 500 one way for reference ..

Anthony

PM  EMAIL  GALLERY  Attn:RR  Quote
01-18-2010 11:56 PM  8 years agoPost 6
kelegba

rrNovice

Angers, France

My Posts: All  Forum  Topic

thank you

PM  EMAIL  GALLERY  Attn:RR  Quote
01-19-2010 02:30 PM  8 years agoPost 7
Jag72

rrProfessor

South of Boston

My Posts: All  Forum  Topic

logo 10 one way --
last night I took an extra logo 10 one way assembly I had laying around and compared it to the logo 500 one way...

for some reason I thought the logo 10 one was about 2mm longer on one side...but I was wrong...they are IDENTICAL...just the one way bearing needs to be "flipped"

so I took it apart and converted it for the logo 500...

check it out


PM  EMAIL  GALLERY  Attn:RR  Quote
01-19-2010 05:20 PM  8 years agoPost 8
Riq

rrKey Veteran

ND

My Posts: All  Forum  Topic

I did this to a couple of mine this weekend, worked great.
I used a couple of sockets in the vice to press it out, as Jag suggested.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 852 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Logo 500 › Logo 10 3D to Logo 500 3D
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Sunday, June 24 - 5:36 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online