RunRyder RC
WATCH
 1 page 336 views POST REPLY
HomeRC & PowerAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › Can low voltage cause gyro servo to respond slowly
01-16-2010 02:46 AM  8 years agoPost 1
michael88997

rrElite Veteran

Lewisville,Tx

My Posts: All  Forum  Topic

Basically the title, I'm setting up a 450 pro and the align servo responds but very slowly and if I move the sticks fast it doesn't move... I'm using a old nimh so I'm sure it has low voltage but the cycle servos work fine... This is brand new servo as well

PM  EMAIL  GALLERY  Attn:RR  Quote
01-16-2010 02:49 AM  8 years agoPost 2
george0079

rrElite Veteran

USA

My Posts: All  Forum  Topic

what gyro?

Hell... I can fix that.
Uh oh..
Nope.
It's ***ked!!!
RE-KIT!!!!!

PM  EMAIL  GALLERY  Attn:RR  Quote
01-16-2010 02:55 AM  8 years agoPost 3
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

Have you tried bypassing the gyro.

PM  EMAIL  Attn:RR  Quote
01-16-2010 03:07 AM  8 years agoPost 4
michael88997

rrElite Veteran

Lewisville,Tx

My Posts: All  Forum  Topic

It's a mini g... Also a weird thing was the servo endpoints were only 100 away from center

PM  EMAIL  GALLERY  Attn:RR  Quote
01-16-2010 03:28 AM  8 years agoPost 5
michael88997

rrElite Veteran

Lewisville,Tx

My Posts: All  Forum  Topic

Let me clear it up, so the servo responds fine it's just delayed, and the servo bearly moves when in the dx6i it's set to 100%, a reason why I thought it was low voltage is because on the ar6200 the sat rx would start blinking occassionally, I'm going to get the esc setup Sunday so I can test It with lipos but I was just wondering if not having enough voltage could cause the gyro to not give the servo enough juice

PM  EMAIL  GALLERY  Attn:RR  Quote
01-16-2010 03:47 AM  8 years agoPost 6
Heli 770

rrProfessor

USA.

My Posts: All  Forum  Topic

You still don't have a multimeter, do you.

PM  EMAIL  Attn:RR  Quote
01-16-2010 04:19 AM  8 years agoPost 7
michael88997

rrElite Veteran

Lewisville,Tx

My Posts: All  Forum  Topic

Actually I found the problem it was the battery low voltage

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 336 views POST REPLY
HomeRC & PowerAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › Can low voltage cause gyro servo to respond slowly
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Sunday, September 23 - 6:02 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online