RunRyder RC
WATCH
 1 page 607 views POST REPLY
HomeRC & PowerAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › spartan ds760 setup question/clarification
01-11-2010 02:57 PM  8 years agoPost 1
Ragz

rrApprentice

India

My Posts: All  Forum  Topic

Hi, This is my first spartan gyro. I am only used to setting up gy 401's until now, so some terms are rather new.

I am setting up this gyro on a trex 600. I have not entered into the config mode yet. I have determined that the rudder and gyro directions are correct. Now there is a part that adjusts low servo endpoint and high servo endpoints. What are we setting here? I am assuming high servo endpoints means "LIMIT" on both sides of the rudder movement. What is low servo endpoint then?

Thanks
Anurag

Anurag

PM  EMAIL  Attn:RR  Quote
01-11-2010 03:00 PM  8 years agoPost 2
cwright

rrKey Veteran

Blossvale New York

My Posts: All  Forum  Topic

They are talking about limits on both sides. They call one high side and one low side. Chuck

PM  EMAIL  GALLERY  Attn:RR  Quote
01-11-2010 03:15 PM  8 years agoPost 3
Ragz

rrApprentice

India

My Posts: All  Forum  Topic

Ah, thought so, but I found that very unconventional so I decided to ask. So, I hold the stick left for low end and right for high end? I guess vice versa is also valid?

Anurag

PM  EMAIL  Attn:RR  Quote
01-12-2010 09:09 AM  8 years agoPost 4
CEGLOBAL

rrApprentice

Lahaina, Hawaii - United States

My Posts: All  Forum  Topic

Ragz

If you are using your Tx to program the gyro, then yes move the stick to the position for one side (low endpoint) and toggle the gain switch on your Tx. The rudder servo will chatter once to indicate that the setting was accepted.
The other side (high endpoint) is the same, move the stick to the position where you want the tail pitch assembly to stop, toggle the gain switch again and the rudder servo will chatter twice to indicate setting acceptance.

I've programmed my DS760 both by Tx and by PC link on my Aeolus 50 3D. Either way works . Programming by Tx was suprisingly simply . Programming by PC link gives you other options that you can adjust .

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 607 views POST REPLY
HomeRC & PowerAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › spartan ds760 setup question/clarification
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, November 13 - 6:09 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online