RunRyder RC
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 4387 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › 7.2V Lipo and Futaba BLS451's?
01-12-2010 02:19 AM  8 years agoPost 21
Doublah

rrKey Veteran

USA

My Posts: All  Forum  Topic

I have been running BLS451 and 253 on 8 volts for over 300 flights. Also running the 6008HS receiver on 8 volts with no problems.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-14-2010 06:46 PM  8 years agoPost 22
Wimbledon99

rrVeteran

UK

My Posts: All  Forum  Topic

But this is stated on the same page.

Many servos on the market, and particularly many of the lower-cost analog types, cannot operate at the voltage supplied by these LiFe Receiver packs. Attempting to use a servo rated for maximum of 6V or less WILL RESULT in reduced servo life, and may lead to in-flight failure. Any such failure is the sole responsibility of the user.

I'm looking to reduce the amount of 'boxes' on the front of my Heli's. I have a Regulator, Rx, Gov and vBar unit (as well as a remote glow).

I liked the thought of a Spektrum 7100R but what collective servo's state they actually accept 7.4v other than the JR 8717HV's?

3D?? No - just another input error!!!

PM  EMAIL  GALLERY  Attn:RR  Quote
01-14-2010 07:50 PM  8 years agoPost 23
jschenck

rrProfessor

La Vista, NE.

My Posts: All  Forum  Topic

MKS and Hitec both make servos that are *rated* at 7.4V (2S LiPo). There are other manufactures as well. But you pay for that rating vs. servos that are known good at 2S LiPo and are not rated there such as the Align and JR8717 (non-HV)

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 4387 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › 7.2V Lipo and Futaba BLS451's?
 Print TOPIC  Make Suggestion 

 8  Topic Subscribe

Thursday, July 19 - 8:44 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online