My Posts: All Forum Topic
I have the GV1 on mine.
I used the stock Align plastic gov mount included with the kit.
That mounts on the RHS frame just above the clutch bell.
First thing you need to do is mount the sensor to the plastic bracket with 2 screws (they arent in the kit lol)
Before you mount the bracket and sensor to the frame, dummy fit the bracket and see how much gap you will end up with between the sensor and magnets.
Adjust sensor accordingly and mount to frame.
Kinda hard to take a pic of mine once its mounted.
I fiddled around with mine a bit before I worked out how it was meant to go.
So yeah, the manual is lacking in this part.
For the love of the hobby