RunRyder RC
WATCH
 1 page 431 views POST REPLY
HomeAircraftHelicopterGasser Model RC HelicoptersOther › voltmeter and gyro 611 amp volt difference
10-21-2009 02:38 AM  8 years agoPost 1
RajSingh

rrApprentice

Fresno, ca usa

My Posts: All  Forum  Topic

My 611 gyro amp is indicating significant voltage difference as compared to two different voltmeters. the two different batteries and the on board generator on my bergen indicated 5.33 v, but the gyro amp shows only 4.9-5.0 volt, as a result when the batt is down to 5.0 volts the gyro amp will indicate low voltage and shuts off. Any remedy for this problem. thanks in advance for any suggestion.
Raj

PM  EMAIL  GALLERY  Attn:RR  Quote
10-21-2009 04:08 AM  8 years agoPost 2
Toadster25

rrKey Veteran

Iowa

My Posts: All  Forum  Topic

I use a 4 cell nicad battery pack and the voltage on it is 4.6 volts so the 611 souldnt shut down at that voltage should it? I don't tink so? If the voltage is reading lower on the 611 amp but everywhere else it is fine then I would think you either have a bad conection to the gyro or there is something wrong with it.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 431 views POST REPLY
HomeAircraftHelicopterGasser Model RC HelicoptersOther › voltmeter and gyro 611 amp volt difference
10-21-2009 04:30 AM  8 years ago •• Post 3 ••
Dood

rrProfessor

Wescanson

My Posts: All  Forum  Topic

My 611's (and GV-1) read consistent with my multi-meter. The 611 voltage display is pretty accurate as far as I'm concerned.

  ▲
▲ ▲

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 431 views POST REPLY
HomeAircraftHelicopterGasser Model RC HelicoptersOther › voltmeter and gyro 611 amp volt difference
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, August 14 - 7:59 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online